BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
The Kingsplit is a new RP glove made of heavy cowsplit leather, with split leather palm reinforcement. The gloves are lined and have a rubber reinforced cuff (10cm), elastic in the back and protection at the knuckles.
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has an extra long rubberized cuff of 10 cm for better protection of the forearm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff. Attractive, highly visible look with yellow and b lue stripes. Available in: yellow/blue.
Seamless liner of cotton/polyester, roughened green latex coating on palm and fingertips.
Superior quality gloves in cowsplit leather, made with Kevlar® fibres for longer service life. The gloves have extra palm, thumb and index finger reinforcement and a 10 cm protective cuff. Available in: green/white. Size: 10, 11, 12.
Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.
Superb protection against cuts and abrasion, successor of Hyflex 11-630
Ultra-thin (21gg) and airy glove that feels like 2nd skin, for precision work.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff and palm reinforcement. Attractive, highly visible look with yellow and blue stripes. Available in: yellow/blue.
Seamless glove with nitrile 3/4 coating. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
Seemles knitted nylon-spandex gloves (15 gauge) with insulating layer foam nitrile on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Seemless knitted nylon/spandex gloves (18 gauge) with foamy insulating layer nitrile on the palm. Ultra-thin ergonomic design provides extreme tactility to handle small parts easily. It is dermatologically tested and solvent-free and is Oekotex certified for no harmfull substances. Fortix™ Technology delivers extended wear time. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Sizes: 6-11.
The new generation of working gloves offering maximum grip with maximum impact protection. Abrasion resistant nitrile foam coating provides exceptional grip in dry environments as well when working when ther is water, grease and oil contact. Lightweight and breathable seamless liner (13 gauge) with Hook <(>&<)> Loop strap for secure fit all day long. Sizes: 7(S) - 12(3XL).
Glove with flexible nylon carrier and nitrile foam coating with anti slip design. Glove is very pleasant to wear and thus provides increased comfort. Excellent grip in oily conditions thanks to the foam nitrile coating with anti-slip design. Available in sizes 6, 7, 8 and 9. In line with EN388 3.1.2.1.
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Seamless cut resistant glove with double nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Cut resistant S-TEX liner (steel/polyester ,nylon). Sizes: 6 (S) - 10 (XXL)
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The glove is fully coated with a double coating layer in the palm, for adequate protection against liquids and oils. Approved for contact with all types of food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Welding gloves made of grey nappa leather with protective cuff. The 15 cm protective cuff is also made of quality nappa leather and the fingers have reinforced seams. Available in: grey.
Supple, wear resistant, silicon-free gloves made of nitrile coated gel foam with lining of knit cotton and rubber inner layer to dampen vibrations. Reduces susceptibility to hand-arm vibration syndrome (HAVS) during industrial activities to an absolute minimum. With Velcro closure.
Cut resistant glove, Nitrile, Palm-dipped, CRF® Technology, Glass fibre thread, Nylon, Polyester, Spandex, 13 gg, Foam grip pattern, Cut resistance level 5, Cat. II, Black, Water and oil repellent palm, for fine assembly work. EN 388:2003, 4544
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X
- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.
Seemless knitted glove 18 gauge with nylon, spandex, carbon fibres and a FORTIX™ foam nitrile coating on the palm. This glove has ES D-functionalitye certified to EN16350, protection products against electrostatic discharge. It is also touchscreen compatible and dermatologically approved by Dermatest and certified by OEKO-TEX®. The nitrile foam coating offers excellent grip and long lastingprotection. The careful selection of materials, the Ansel ZONZ™ Comfort Fit Technology and proprietary washing process makes the HyFlex® 11-819 a clean, ultra breathable and highly comfortable glove. The glove is latex and silicone free, and laudryable at 40°C. Sizes: 6-11.
Very durable and super comfortable glove, seamlessly knitted in a nylon fabric with a double nitrile coating. Glove is fully coated for applications involving a lot of oil or water. The glove provides excellent grip.
Seamless glove with impermeable full nitrile coating all over the hand with extra nitrile foam coating finish on the palm for good grip on wet or oiled components. High-abrasion resistance and anti-impact protection on the back of the hand. Unique Showa ergonomic shape that replicates the natural curve of the human hand. High-visibilty green colour for visible hand signaling. Seamless knitt designed to prevent irritation.No Latex. Sizes: 7(M)-10(XXL)
•Framing finger config for grasping fasteners •Padded palm with Tena-Grip™ reinforcement •Technical hex-stretch poly knit construction •Neoprene knuckle pad •Low-profile molded hook and loop closure with ID space •Pull-on tab for easy on/off •EN 388: 2016: 3.1.3.2.X •Patent pending
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam/aqua PU in the palm with longer cuff. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.
Synthetic glove, Nitrile foam/waterbased PU, Palm-dipped, Acrylic, Nylon, 10 gg, 15 gg, Spandex, Foam grip pattern, Fleece, Cat. II, Black, yellow, Withstands contact heat up to 100°C, for allround work . In line with : EN 388:2016, 4221X EN 407:2004, X1XXXX EN 511:2006, X2X
Seamless lined glove with foam latex coating on the full glove and extra latex on the palm. Extremely good grip and abrasion resistance. Carrier in nylon/polyester. Sizes: 6(S) -10 (XXL).
Overglove hight voltage in premium goat skin leather for insulated rubber gloves of class 1,2,3 <(>&<)> 4. Offers mechanical protection and extends the life of rubber insulated gloves. With velcro, lenght: 30 cm. Sizes: 8-12.
Glove with double nitrile coating on a very flexible, thin 18 gauge seamless nylon/spandex liner. The fully coated glove prevents penetration of oils (due to the red smooth nitrile coating) and this without loss of grip (due to the black nitrile foam coating). Highest protection against abrasion in combination with short-term protection against contact heat (100°C). In accordance with: EN388:2016: 4.1.2.1.A, EN407:2021: X.1.X.X.X.X.
Extremely good fingertip sensitivity, extra flexible, perfect fit and extremely light glove. Seamless knitted white nylon (13 gauge) Suitable for light applications in dry circomstances. Sizes: 6-11. In line with EN388: 2.1.2.X
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Medium duty glove with TPR impact protection on the upper hand and fingers, TPR design with smooth knuckles and 2 separate fingers. Durable padded red artificial leather palm, with reinforcement around the index finger to protect sensitive areas. The tips of the index, middle finger and thumb are suitable for touch screen work. Good visibility for extra safety. Sizes: 8-13. Conforms to: EN388: 2016 2.1.2.1.X.P
Very robust and strong rescue glove with extreme protection levels, designed for firefighters and rescue teams, suitable for heavier rescue operations at accidents, (natural) disasters, etc. such as clearing debris, breaking up wrecks, etc. but also in various industrial applications. Sizes: 6-13.
Glove with unique and patented knitted design (18 gauge) that allows the glove to tear easily at multiple high risk areas, significantly reducing the risk of hand injury if the glove becomes entangled in a rotating tool. Ultra thin design and nitril foam coating provides excellent tactility to grab even the smallest parts. ZONZ™ Technology offers extreme breathability to keep hands cool and comfortable. The wihte color allows quick identification of dirt to avoid product contamination. Antistatic, latex and silicone free: no transfer of silicone contaminants to metal parts prior to painting. Sizes: 6-11.
Very light and ultra comfortable all round glove constructed on a 18-gauge polyester and spandex liner with thin and smooth protective nitrile coating. Offers heat protection up to 100°C during 15sec. Ideal for precision work. Food approved. Touch screen fonctionality. High visibility yellow. Sizes : 7 (S) - 11 (XXL)
Loggers working gloves with mechanical resistance in 100% goat leather with nylon and spandex inserts in red color. They provide great dexterity and grip. They have a perfect fit, and impact and vibration foams in the palm of the hand. Sizes: 8-12.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a liquid-tight palm and an airy top. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a 3/4 liquid-tight coating. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Dexterous cut resistant glove with highest cut level F, suitable for precision work. Ultra light thanks to 18 gg knitted with CRF® Omni cut resistant technology. Palm dipped with super soft nitrile foam that provides excellent grip on dry surfaces. Reinforced thumb crotch for improved longevity. Breathable materials for all day comfort. Wide range of sizes means a perfectly fitting glove for everyone. Skin friendly with Derma-test and Oeko-Tex certificate. CAT II . In line with : EN 407:2004 X1XXXX - EN 388:2016 4X43F - EN 420:2003+A1:2009
Heavyweihgt working glove in piggrain leather, collar model, specially-sewn thumb, cotton back and cuff. Extra small end extra large sizes : 4, 7-13.
Antivibration protection for building and construction applications. Synthetic glove with premium PU in the palm. Damping foam for excellent anti vibration performances. Ventilation between the fingers. Exellent fit and preformed hand shape. Sizes: 7-12.
Seamless knitted polyamide/elastane grey glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 25 seconds). Suitable for handling, and precisionwork in dry and oily conditions. Sizes: 7-11.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Seamless knitted nylon glove with white PU coated fingertips. For microelectronics, packaging, archiving and precision work. Sizes: 6, 7, 8, 9.
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Thumb and forefinger reinforced, double stitched, precurved fingers, the palm has a striking red color. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Completely winter lined. Touchscreen function on the forefinger. Sizes: 7-11. Conform: EN388:2016 3.X.4.2.D.P, EN407: X.1.X.X.X.X, EN511: 1.2.1
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
Durable un-lined glove in synthetic leather with great dexterity and a good grip. The pre-shaped fit makes the glove comfortable and flexible, an elastic at wrist and a half-length cuff to ensure that the glove stays firmly in place. Sizes: 6-13.
