BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 2 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
I-beam trolley for I-beams ranging from 9 to 35.5 cm. Maximum thickness of beam 3.2 cm. For horizontal use. Suitable for 1 person with max weight (gear included: 140kg). Atex approved. Can be used in combination with a safety line or fall-block.
Self-contained fall protection system, mobile anchor rail with a length of 6m. Different configurations possible. For access to eg trucks, containers, tankers,... Including 4 concrete slabs of +/- 1000Kg. Price includes transport. Price for assembly on demand.
Kernmantel restraint lanyard 1.5m with a twist lock karbiner and a steel GO55 Scaffold hook. Only suitable for positioning.
Rapid rescue device at height; made of aluminum alloy and high-strength steel with 9.6mm diameter semi-static kernmantel rope, assembled with the device. Rope ends with double 8 knots for connection with carabiners which are included. Controlled descent speed: 0.8m/sec for maximum weight of 150kg.
Comfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools.
Rebel fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use. Can be maintained.
Pulley with carabiner to attach to tripod for cable of winch or fall arrest block.
Steel adapter set (composed of FA 60 101 01a to be installed on tripod FA 60 101 00 or FA 60 102 00 - and FA 60 101 02P to be installed on winch FA 60 003 20/ FA 60 003 30/ FA 60 023 20/ FA 60 023 20R)
Winch for descents or rescue. To be used in combination with AM100 tripod. Galvanised cable. Best used in combination with suspension harness. To be used in confined spaces.
Rope clamp for kernmantle ropes from 8 to 13 mm. Facilitates lowering of hoisting of a person using the Rollgliss system if the clamp is mounted on the rope of the Rollgliss. In compliance with: EN341.
Lanyard, 2 metre length, consisting of elastic strap with integrated shock absorber. Fitted with two standard carabiners. Max. user weight: 140kg.
Equipped with 2 large self-closing aluminum hooks (23kN) and 1 standard aluminum hook (25kN). Easy to visually inspect due to the contrasting color stitching. Maximum user weight incl. tools: 140kg.
Adapter for mounting sealed block on davit arm.
Fall-prevention device, 25 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7.4 kg.
Fall arrest block Rebel 20 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage.Weight: 10kg.
• Innovative self-closure system that traps objects inside, the pouch makes it nearly impossible for objects to fall out once placed in the bag.• Easy to retrieve objects since no opening or closing is necessary.• Compatible with most tool belts. Belt loops
Tool cord 30.48 cm with carrying capacity up to max. 4.5kg. There are trigger hooks on both sides of the line, these rotate around a spindle so that the rope cannot become tangled. Pack of 10 items. Not PPE.
Belt lanyard with karabiner.
Tool-bag with D-ring and 2 pull-outs. Hook and loop closure system. Loops to attach to belt strap. Easy to open even when wearing gloves. Maximum weight: 2.3 kg Not PPE
Hammer holster with hook and loop to keep the hammer securely in place so that the tool does not fall when working at height. With reflective details. Maximum weight hammer: 2.3 kg Not PPE
183 cm tray for attaching tools with a maximum weight of 15.9 kg to avoid tools falling when working at height. Provided with a loop on one side and a carabiner with safety lock on the other side. Not PPE.
Anchor lance, synthetic material, extendible from 1.8 to max. 7.8 metres. Forms an anchor point in combination with carabiners with AP168 cord. Ideal for attachment of a temporary vertical safety line for safe vertical movement. Temporary vertical life-line with line clamp, can be attached to eye of carabiners. Anchor lance cannot be removed until protection is no longer required. Weight: 2.5 kg.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 5m. Anchor point for protection of one person.
Anchorage for I-beams ranging from 6.35 to 45 cm. Maximum thickness of beam 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
1/2 day on-site training fall protection by 3M. Content and location according to your needs.
Adaptor to connect the old davit arm with the new fixed base No PPE.
Fall arrest device 1,8 meter webbing with shock absorber and fallindicator. Housing made of plastic (high impact nylon). Stops almo st instantly any vertical downward motion. Serves as connection between anchor point and harness. With 2 twist-lock carbiners. For vertical and horizontal use, specially designed for use in aerial work platforms. Sharp edge tested. Suitable for fallfactors 0,1 and 2. Weight: 1;02kg.
1 day rent for the mobile training unit and training fall protection by 3M. Price for a few days on demand.
Very comfortable positioning harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg straps for greater comfort and ease. Chest and leg straps fitted with quick release facility with lock. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Integrated fall indicator.
Fall arrester for use on Söll fall-protection rails. Can be attached to rail at the beginning of the climb. Moves with the person ov er the rail and stops any fall immediately. Must be connected to the chest anchor point of the harness.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic. Also available in Fluo yellow and Fluo orange.
I-beam trolley for I-beams ranging from 76 to 203 mm. Maximum thickness of I-beam: 17 mm. Easily follows the movements of the anchor ed person. Can be used in combination with a safety line or fall-protection block.
Ascender for left-handers for use on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openi ngs at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a bette r grip when pulling up a rope.
Ascender for right-handers on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openings at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a better grip when pulling up a rope.
Hand winch to assist with raising and lowering. Can be used in combination with Rollgliss set and Rollgliss tripod. Minimum reductio n required for use of the hand winch: 3:1 reduction. Weight: 3 kg.
Bag for tools that can be attached to harness. Made of solid plastic with transparent section for easy use at height. Content 7.4L.
Very robust fall-prevention device with winch, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 15 kg.
Very robust fall-prevention device, 9 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 9 kg.
Very robust fall-prevention device with winch, 9 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 12 kg.
Window <(>&<)> door groove anchor: Adjustable from 55 to 130 cm width. Non-penetrating design, does not damage the construction. The anchor is simply compressed between two vertical sides of structure. Quick and easy to install with built-in settings button, no tools or drilling required.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2 (horizontal).
Double fall-stop device 2.5 metre strap with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2.
TOOL CINCH ATTACHMENT with two wings - 15.9 kg maximum carrying capacity
To anchor tools to avoid tools falling when working at height. Max weight: 15.9 kg. Not PPE.
Case in neoprene for roller meters. Fits most roller sizes. Provided with a clip to attach to a belt strap or holster. Ideal when working at height Not PPE.
Comfort tool belt. Extra padding for comfort. Modular design for flexible carrying options. For safe storage of tools while working at height. Size: L/XL (36-44cm) Not PPE.
Unique sleeve design conforms to the size of virtually any drill battery.Sleeve is cinched to the drill, allowing the drill to be tethered off while being used at height.
Python scaffold wrench holster (belt)with retractor and ext-H2LBungee.
Harness for heat applications made from Nomex on Kevlar carrier with 2 anchoring points. Combustion temperature 425°C. Easy to put on due to delta shape on the back. Test weight: 140 kg, Sizes U-XL.
Fall arrest block Rebel 25 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13kg.
Fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use; if horizontal: 2-metre anchor loop must be used (Art. 1026475).
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Double fall-stop device 2 metre strap with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
1/2 day training anti-fall protection by 3M (Capital Safety) at the training center of 3M.
