BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case (1034120) when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: O2 with alarms at 19.5% and 23.5% Vol. (min. 18% and 25% Vol.) Range mesure: 0-25% Vol IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
CO2 measuring device to monitor indoor air quality. Unique design, look and feel, easy to use. Clear indication of the CO2 concentration on the display. Adjustible visual and acoustic alarm settings. Algorithms that indicate the air quality based on CO2 and type of actifity. Measuring range: 400 to 2000ppm, temperature: -20°C to 60°C, humidity from 0% to 100% RH. Life span at least 36 months, does not require calibration. The HTRAM calibrates itself every 7 days. The device can be connected via the Transmission Risk Air Monitor by Honeywll Int. app on a smartphone when it is near the detector. By using the app, one can configurate custom alarm settings. USB cable for charging is included, plug must be ordered separately 1051636.
Plug for connection USB cable of the HGAS-HTRAM CO2 detector..
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 10PPM and 15PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Simultaneously check and display up to five atmospheric hazards with the GasAlertMicro 5: explosion measurement and 4 toxic gases. PID meter for measuring volatile organic substances. The GasAlertMicro 5 is compatible with BW<(>&<)>#146;s MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms. Supplied with data logging, rechargeable batteries and charger. Fitted with a built-in pump. Version: LEL, O2, H2S and CO. IP rating 65 and Atex approved.
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must b e attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. M onitor must be analysed in a laboratory at a later time. Measurement of: organic vapours. Shelf life: 18 months in sealed packaging. Does not produce alarm.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 5PPM and 10PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Compact personal alarm for lone workers and company first responders. The personal alarm can be used to alarm and to receive alarm messages. You can alarm by pressing the emergency button, by pulling the neck cord, via the man down function when there is no movement or lying position and via the timer function. The device has a talk-listen connection so that communication can also be done via speech. The personal alarm is often used by company first responders, deposit service technicians and healthcare professionals. The device can be worn around the neck and on the belt. The TWIG Neo comes with belt clip, charger and charging cable.
Bottle of 58 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S (25PPM) and CO (100PPM).
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
New portable fixed life 4-gas detector designed specifically for general workers and users. No live gas readings, and no training needed. When there is a gas alarm, the bell icon on the display will iluminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area. It is maintenance free and has a fixed life of 2 year. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane.Compatible with Intellidox for Icon or nest when an other Intellidox is in use.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Compact personal alarm for lone workers and company first responders. The personal alarm can be used to alarm and to receive alarm messages. You can alarm by pressing the emergency button, by pulling the neck cord, via the man down function when there is no movement or lying position and via the timer function. The device has a talk-listen connection so that communication can also be done via speech. The TWIG Neo features GPS/GNSS for outdoor location determination. The personal alarm is often used by company first responders, deposit service technicians and healthcare professionals. The device can be worn around the neck and on the belt. The TWIG Neo comes with belt clip, charger and charging cable.
Bottle of 34 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S(25PPM) and CO (100PPM).
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. LEL sensor is set for methane by default (specify if a different gas is applicable for the LEL sensor). Version: CO and LEL. IP rating 65 and Atex approved.
Wrist band for TWIG EMBODY or NEO.
Desktop charger compatible with Twig One and Twig One Atex devices, full USB connectivity (USB cable not included).
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: SO2 with alarms at 2PPM and 4PPM. (min. 2PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Hibernation case to gain up to one year extra of operation on two-year CO and H2S versions of the BW Clip.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Bracket for wall mounting of test gas bottles of gas of 34, 58 and 110 liters.
Regulator for mounting on gas bottle for testing or calibration of gasdetection devices.
Set of 10 smoke tubes for establishing and checking air currents when checking ventilation systems, for the detection of leaks in pipelines, stoves and windows, and checking ventilation systems in mining.
Set of 10 smoke tubes, aspirator, sealing caps and carrying case for establishing and checking air currents when checking ventilation systems, for the detection of leaks in pipelines, stoves and windows, and checking ventilation systems in mining. No PPE.
Expected life span : 5 years, with 3 years warranty. When there is a gas alarm, the bell icon on the display will iluminate, along wiht an indicator next to the sensor in alarm, so workers can quickly clear the area. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane, but more possibilities in other sensors . Smart sensors: data is saved on the sensor instead of on the detector. Compatible with Intellidox for Icon or nest when an other Intellidox is in use.
Replacement power adaptor for GasAlert-devices.
Kit to activate IntelliDox. Includes power supply with region-specific AC power cord, ethernet cable, inlet (purge) filter assembly,3 ft. / 1 m calibration gas tubing, 3 ft. / 1 m purge gas tubing, 15 ft. / 4.5 m exhaust tubing, quick connect fittings.
Robust belt clip for Twig One and Twig One Atex rotates 90 ° so that the device can be worn both vertically and horizontally. The belt clip is securely attached to the device with screws, glue and a bracket.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW FLEX and BW ICON Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Mandown alarm in the form of a compact GSM device. Supplied with charger, USB adapter, USB cable and clip for wearing on your belt. Can also be worn on the arm or around the neck with accessories that can be supplied separately. Provides automatic alarm via SMS or call to max. 10 pre-programmed telephone numbers. Alarm is activated by a lack of movement or absence of movement through a specific angle (horizontal or vertical). Alarm can also be activated manually via a separate button. Always gives an initial alarm that can be overridden in order to avoid false alarms. Once alarm calls have been processed, there is a signal of 110 dB which allows the person to be located. Works on basis of SIM card. Initial configuration and all settings can be amended via free software downloaded from www.twigcom.com. With GPS location option that can send a Google Maps link via SMS (works best outside buildings). Atex version II 2G Ex ib IIC T4 Gb
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,H2S,CO, VOCs.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. .
Release for mounting on gas bottle for testing or calibration of gasdetection devices. To use in combination with dockung station.
Measuring tube to be used in combination with hand pump to measure concentration.
Measuring tube CO2-HP.
Set of 2 filters to protect sensors.
Simultaneously monitor and display up to fi ve atmospheric hazards with the GasAlertMicro 5. Adaptable to a variety of applications, the GasAlertMicro 5 has an extensive selection of user-settable fi eld options and is available as either a standard toxic gas model, a PID model for the detection VOCs, or an IR model for CO2 detection. Use the passcode function to prevent unauthorized modifi cations of the instrument <(>&<)>#146;s settings. Compatible with BW<(>&<)>#146;s MicroDock II automatic test and calibration system, the GasAlertMicro 5 is unparalleled in its versatility, performance and overall value.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option and only for 2-year detectors) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: 3 YEARS H2S with alarms at 10PPM and 15PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Charging station to charge rechargable battery pack of GasalertMicro5. Colour: black.
Mandown alarm in the form of a compact GSM device. Supplied with charger, USB adapter, USB cable and clip for wearing on your belt. Can also be worn on the arm or around the neck with accessories that can be supplied separately. Provides automatic alarm via SMS or call to max. 10 pre-programmed telephone numbers. Alarm is activated by a lack of movement or absence of movement through a specific angle (horizontal or vertical). Alarm can also be activated manually via a separate button. Always gives an initial alarm that can be overridden in order to avoid false alarms. Once alarm calls have been processed, there is a signal of 110 dB which allows the person to be located. Works on basis of SIM card. Initial configuration and all settings can be amended via free software downloaded from www.twigcom.com. With GPS location option that can send a Google Maps link via SMS (works best outside buildings).
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option and not for 3-year life detectors!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: 3 YEARS CO with alarms at 20PPM and 100PPM. Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Robust belt clip for Twig NEO rotates 90 ° so that the device can be worn both vertically and horizontally. The belt clip is securely attached to the device with screws, glue and a bracket.
The IntelliDoX system combines smart docking modules and Safety Suite software to provide automated instrument management for BW Solo gas detectors - helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values: 1,6 - 3,2ppm.
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must b e attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. M onitor must be analysed in a laboratory at a later time. Measurement of: ethylene oxide. Shelf life: 18 months in sealed packaging. Does not produce alarm.
Handy gas tester for gas test tubes. The diaphragm relaxes to suck air in through the tube. This robust manual design is always ready for use and can be operated with one hand. Ideal for environments such as the inland waterways.
Charger 12-24V gas detector for Gasalertmicroclip, Quattro and MAX XT to charge in the car.
Measuring tube CO-HP.
