BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
Allwik pads... Ideal for use in small or difficult to access areas or with continuous leaks. Absorb industrial liquids including oils, water, solvents and coolants liquids. Ideal for continuous leaks or small spaces. Dimensions: 43cm x 48cm8 pads per box Absorption capacity: 53L
Only-oil spill box Contains 15 cloths 41cm x 51cm. 15 cloths per box. Capacity: 10 litres.
4-points suspension for G22C helmet with synthetic sweatband.
Visor for air hood Simplair.
Oxygen producing self-rescue set with mouthpiece and nose bridge, for very hazardous circumstances and/or places where a lack of oxy gen may develop. Stored in a hermetically sealed, stainless steel carrying box with belt loops, can be used with carrying harness SS R30/100 B for carrying unit on the body, either opened or unopened. Works using an oxygen generating KO2 cell that can be replaced o nce it is used. KO2 cell is activated by first exhalation, responds to moisture and CO2 in exhaled air. Very maintenance-friendly, o nly requires annual test of seal. Working time: at least 30 minutes at consumption of 30 l/min. (escape), 100 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 2.1 kg.
Trainer self-rescue set SSR 30/100 and SSR30/100 B.
Sweatband for Barisoft air hood.
Direction arrow 45°. Rescue sign in polypropylene. Dimensions: 200x200mm.
Absorbent wipes on 38 cm x 46 m sized roll, sheets perforated lengthwise every 23 cm. These heavy-weight double-perforated pads on a roll are packaged in a box. Available per roll. The wipes are made from 3-ply melt-spun polypropylene. This means they do not absor b water and can permanently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vege table oils and other water-insoluble chemicals. Absorption capacity: 94 litres.
Heavy-weight absorbent pad measuring 74 cm x 24 cm. Absorbs oil and petroleum-based products. Consists of a reinforced upper layer a nd a non-slip under layer that keep the mat in place and prevent leak-through. The UV resistant upper layer makes outdoor use possib le. This absorbent mat can be combined with strips that hold the mat in place. Absorption capacity: 104 litres for 1 roll.
Laboratory can, polyethylene, 2 litre, with self-closing lid. Ideal for safe storage of small quantities of flammable and hazardous liquids. Not for solvents. With spring-operated lid and pressure relief valve. Fitted with rubber seals and fire retardant flame arr estor. Operating elements made of stainless steel. Dimensions: W x D x H 140 x 235 x 220mm.
Anti-static absorption mat measuring 183 cm x 46 m. This medium-weight absorption mat is ideal for creating a safe workplace in area s with heavy traffic, even areas with forklift traffic. The mat absorbs oil, water and chemicals. The grey colour hides dirt and pro motes longer use. Absorption capacity: 223 litres per roll.
Plunger can made of stainless steel. This can is useful for safely dampening cleaning rags, sponges, etc. with flammable or environmentally harmful liquids. A spring-operated stainless steel pump system pumps the liquid to the submersion screen, keeping consumption to a minimum and also serving as a flame arrestor. Any excess liquid is returned to the can. Capacity: 2 litres. Dimensions:131 x 330 mm.
Safety can, 11 litre, polyethylene. Is used for the safe storage and distribution of solvents, acids and bases. Impact resistant and explosion-safe. Operating elements and flame arrester made of stainless steel. With a self-closing cap equipped with a pressure rel ief valve. Dimensions: W 320 x H 330 mm.
Robust drum rack, galvanised version, for two 50, 60 or 200 litre drums. Dimensions: approx. W 1180 x D 600 x H 380 mm. Suitable for : processes involving chemical risks.
Plunger can made of stainless steel. This can is useful for safely dampening cleaning rags, sponges, etc. with flammable or environmentally harmful liquids. A spring-operated stainless steel pump system pumps the liquid to the submersion screen, keeping consumption to a minimum and also serving as a flame arrestor. Any excess liquid is returned to the can. Capacity: 1 litre. Dimensions: 111 x 270 mm.
Fire, open flame and smoking prohibited. Prohibition sign in polypropylene. Diameter: 315mm.
Eye protection required. Mandatory sign in polypropylene. Diameter: 315mm.
Drum covers with a diameter of 56 cm. These medium-weight drum covers are packaged in a box. Packaged per 25 pieces. Ideal for the a bsorption of all industrial liquids, including oils, water, solvents and coolants. Drum covers are handy for pumping liquids out of upright drums. Absorption capacity: 26 litres.
Spill kit for larger calamities. The chemical and water resistant can contains the materials, which is ideal for outdoor storage. Th e container can be used to transport used material. Content: 100 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 8 socks (7.6 x 366 cm), 8 pillows (43 x 48 cm), 50 wipes, 1 pair of safety glasses, 1 pair of gloves, 10 disposal bags and 1 emergency response handbook. C apacity: 264 litres. The absorption material in the spill kit is of MRO quality.
Throat protection made of Tecaweld, a mix of 75% cotton and 25% Kevlar fibres. Tecaweld is even more resistant to flames and molten metal and is also very flexible and durable. Tecaweld is more resistant to flames and molten metal and is also very flexible and dur able.
Ear and throat protection, leather, 3-piece.
Chin strap for attachment to fireman's helmet Pyros F220. No PPE.
GREEN PADDED HOSE ABSORBS UNIVERSAL CHEMICALS. DIMENSIONS 20 CM X 3 M. 4 HOSES IN 1 BOX LARGE FORMAT, LINT-FREE HOSE FOR APPLICATION ON LAND
Rescue sign - Safety shower in self-adhesive polyester. Dimensions: 100X100mm. Not PPE.
Rescue sign - Emergency exit left in polypropylene. Dimensions: 400X200mm. Not PPE.
Silverfront for welding helmet 100 series.
Welding helmet 100 series without headband.
Warning sign - Dangerous electrical voltage in self-adhesive polyester. Side Dimensions: 315mm. Not PPE.
Oil absorbing sock from PP with strong suction power. Dimensions: 122 cm. Diameter: 7.6 cm. Absorption capacity: 106 litres.
Durable, double-perforated floor mat roll in camouflage colour. With its smart design and unique camouflage pattern, the Battlemat strong enough to absorb and resist everything: oil, water, coolants, solvents, acids and alkalis. The durable, abrasion resistant upper layer with camouflage colouring draws moisture into the bottom layer. A perfect mat for walking on and for use in production halls and factories (also where there is heavy traffic, washing etc.). Battle mats are very cost-effective! 76 cm x 46 m
Fire Fighting sign - Fire blanket in polypropylene. Dimensions: 200X200mm. Not PPE.
Low black safety shoe S3 with steel toecap, over-toe and steel sole plate, made from full grain cowhide leather. Leather insole and leather lining. NITRILE RUBBER sole with heel profile, high abrasion resistance, anti-static, anti-slip, oil, gasoline and acid-resistant. Equipped with a quality support sole. Extra roomy fit (XL). Available in 50 - 53. Conforms to 20345 S3 HRO SRC
Rescue sign - Direction pointer 45° in polypropylene. Dimensions: 250X250mm. Not PPE.
Absorption role, double perforated, height 72 cm x 47.5 m made of recycled material. Medium quality with firming topcoat, high absorption capacity and no plush. Suitable for practically any application industrielle. Very economical to use. Absorption capacity 200 liter capacity.
Absorption role, double perforated, height 72 cm x 47.5 m made of recycled material. Medium quality with firming topcoat, high absorption capacity and no plush. Suitable for practically any application industrielle. Very economical to use. Absorption capacity 234 liter capacity.
Carrying cage to store and transport 4-gas gasdetecting device Gasalertmicroclip and accessories.
Carrying case for 5-gas detector gas Gasalertmicro 5 and accessories to store and transport.
Carrying case to store and transport 4-gas gas detector Gasalertmax XT and accessories.
Sign according GHS normation in self adhesive polyester: Hazardous to aquatic environment. Size: 100x100mm. Roll. No PPE.
Sign within GHS normation in self adhesive polyester: explosive. Size: 100x100mm. Roll. No PPE.
Sign within GHS normation in self adhesive polyester: explosive. Size: 50x50mm. Roll. No PPE.
Sign according GHS normation in self adhesive polyester: acute toxicity. Size: 100x100mm. Roll. No PPE.
Mandatory sign - Safety gloves mandatory in aluminium plate. Dimensions diameter: 315mm. Not PPE.
Prohibition sign - No smoking in aluminium plate. Dimensions diameter: 200mm. Not PPE.
Prohibition sign - No fire, open flames or smoking in aluminium plate. Dimensions diameter: 200mm. Not PPE.
Prohibition sign - No fire, open flames or smoking in aluminium plate. Dimensions: diameter: 315mm. Not PPE.
Prohibition sign - No fire, open flames or smoking in polypropylene. Dimensions diameter: 400mm. Not PPE.
Order sign - Respiratory protection required in polypropylene. Dimensions: diameter: 315mm. Not PPE.
Mandatory sign - Hand wash mandatory in polypropylene. Dimensions diameter: 200mm. Not PPE.
Mandatory sign - Safety shoes mandatory in aluminium plate. Dimensions diameter: 315mm. Not PPE.
Warning sign - You are entering an explosive atmosphere in polypropylene. Side Dimensions: 315mm. Not PPE.
Fire fighting sign - Fire blanket in self-adhesive polyester. Dimensions: 100X100mm. Not PPE.
Fire fighting sign - Fire blanket in self-adhesive polyester. Dimensions: 148X148mm. Not PPE.
Fire fighting sign - Fire blanket in self-adhesive polyester. Dimensions: 200X200mm. Not PPE.
Hose for oil absorption. Diameter: 20cm. Length 5m. Absorption capacity 228 litres. 2 items per bag.
Oil-skimmers keep your pits, tanks, drains and reservoirs oil-free. Dimensions: diameter 20cm x 45cm. Absorption capacity: 131 litres per 10 items.
ROLL GREEN PADDED UNIVERSAL CHEMICAL ABSORBER. DIMENSIONS 76 CM. X 46 M. FOR LARGE SURFACES
OIL PLUS… The most popular oil absorbing rolls in the range. The perfect choice for general maintenance work!… or underneath/alongside machines for absorbing small leaks and splashes. Absorbs oil, petroleum , hydrocarbons and other oil-based liquids. Low-lint spun fleece top layer makes the product stronger. Suitable for applications that require a strong absorption medium with high absorption capacity. Ideal for absorbing machine vapour and spray or capturing splashes and leaks during maintenance work. Roll, 76 cm x 46 m Heavyweight, double-perforated <(><<)>(><(>&<)><(><<)>)> bonded Absorption capacity: 187L
Roll for absorption oil: heavy weight and bonded. Dimensions: 76cm x46m. Packaging; 1 roll/box. Absorption capacity: 187L.
Oil Plus products effectively absorb oil and other petroleum derivatives. Oil Plus is an environmentally friendly, top quality, padd ed absorbent: extremely strong and with high absorbency. Roll of cloths 76cmx46m double-perforated every 38 cm.
Spill Truck recommended for medium-sized incidents, leaks and maintenance work involving industrial liquids. Double doors provide easy access to the products.Content is clear and conveniently arranged for extra convenience. Case is resistant to chemicals and protects the contents against dirt and moisture. Easy to handle. Narrow corridors and door openings are no problem. Equipped with wheels for rapid intervention. For cleaning up medium-sized incidents and leaks. Chemical and water resistant container protects the contents against dirt and moisture. Cover can quickly be folded open in case of an emergency. Equipped with wheels for a rapid intervention. Ideal for major incidents and leaks. Cover can be quickly removed in the event of an emergency. With wheels for rapid intervention, both in the workshop as beyond.
Do-it-yourself kit for creating flexible fluid barrier. Barrier made of flexible material for use in any situation. Reverts back to original form, even if a forklift truck drives over it. Kit includes 2 sections of 7.6m, 4 corners and 6 silicone tubes for securing the barrier.
SIR is resistant to the most aggressive chemicals. Dimensions: 92cm x 91.5m, 1/bale. This model has twice the width to cover a greater area.
