BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Mains power socket plug with USB charging port. Power adaptor 230v DC to USB 5V, for use with PELTOR™ ACK053 rechargeable battery pack. Compatible USB Charging Cable PELTOR™ AL2AI or PELTOR™ FR09 required. No PPE.
Shoe polishing set black, consisting of shoe cream, brush, polishing cloth and cleaning instructions.
Fire-resistent seal for the head shell as accessory of hoods M-106, M- 107, M-306, M-307. No PPE.
Absorbent pads measuring 41 cm x 51 cm. These medium-weight perforated pads are packaged in a box. Packaged per 100 pieces. The wipe s are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for abs orbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorptio n capacity: 102 litres.
Ergonomically shaped long knee protectors made of rubber with a hard gel pad. The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
Stretchable nylon rope for attachment of tools, to prevent accidents caused by falling tools. The rope has an aluminium snap hook and adjustable loop. Length: 0.89 m - 1.1 m.
Air heater with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can heat air a maximum of 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose in rubber of PU to hood not included. All usable buttons are made blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min. NPF: 50 with M-100 and 200 with all other hoods.
AE1HGP3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C ,sulfur dioxide and hydrogen chloride, mercury and toxic dust, vapour and smoke particles.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
Chemical jacket made of PVC C2. The zipper is covered by a double flap with Velcro. The jacket also has an extended collar and elast ic cuffs at the wrists. The Aci-Tec jacket can be used in combination with the Aci-Tec trousers. Available in: green. Sizes: M - XXL .
Trousers, aluminized carbon/para-aramide, 540 gr./m², lining in cottonProban, fly-closure with press-studs, 2 side slits under flap, seams stitched with Kevlar ®. Sizes: M - XXL.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of half-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 225 x 125 mm.
Oxygen producing self-rescue set with mouthpiece and nose bridge, for very hazardous circumstances and/or places where a lack of oxy gen may develop. Stored in a hermetically sealed, stainless steel carry bag with belt loops. Works using an oxygen generating KO2 ce ll that can be replaced once it is used. KO2 cell is activated by first exhalation, responds to moisture and CO2 in exhaled air. Ver y maintenance-friendly, only requires annual test of seal. Working time: at least 30 minutes at consumption of 30 l/min. (escape), 1 00 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 2 kg.
Kiss-of-life breathing mask with one-way valve for resuscitation and first aid. The mask serves as a hygienic cover over the victim' s face. Packaged in a handy, yellow key chain holder.
This transparent mask for mouth-to-mouth resuscitation allows a goodviewof the victim. Packed in a hard box.
First aid. Rescue sign in self-adhesive polyester. Dimensions: 148x148mm.
Fire extinguisher. Fire safety sign in polypropylene. Dimensions: 148x148mm.
Absorbent pads measuring 7.6 cm x 122 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. They do not absorb water, and they float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. The great flexibility of the socks allows them to be easily placed around machines. Absorption capacity: 43 litres.
Mobile yellow container for general areas. The chemical and water resistant container protects the content against dirt, moisture an d damage. Content: 50 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 6 pillows (43 x 48 cm), 1 pair of gloves, 2 pairs of safety glasse s, 3 disposal bags, 1 emergency response handbook. Absorption capacity: 123 litres. The absorption material in the spill kit is of O P quality.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 50 x 50 cm.
Mobile yellow container for general areas. The chemical and water resistant container protects the content against dirt, moisture an d damage. Content: 50 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 6 pillows (43 x 48 cm), 1 pair of gloves, 2 pairs of safety glasse s, 3 disposal bags, 1 emergency response handbook. Absorption capacity: 124 litres. The absorption material in the spill kit is of M RO quality.
Prohibition sign - No fire, open flames or smoking in self-adhesive polyester. Dimensions: diameter: 100mm. Not PPE.
Mini-Cable Locking System in Mini Cable Locking System. Locks both hand wheel taps and interrupters. Not PPE.
Seamless knitted aramid and steel wire glove, fitted with a palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish. Sizes 7, 8, 9 and 10.
Msa’s replacement hard hat 6-point fas trac suspension offers a combination of advanced features for a comfortable and secure fit. I s has a quick and easy adjustment.
Acrylic lining without seams, PVC coating, thickness 1.1 mm, length 30 cm. The lining protects against cold (up to -20°C), is comfortable and efficient. The PVC is highly resistant to most chemical products. Good tear resistance. Washable at 40°C with a neutral detergent. Sizes: M(8)-XL(10).
Absorption cloth with dimensions 38 cm x 48 cm. These lightweight cloths are packed in a box. Available per 100 pieces. These cloths are made from recycled materials and to absorb 50% more than polypropoyleen canvases. Ideal for absorbing all industrial fluids, including oils, water, solvents and coolants. Absorption capacity: 121 liter.
Bracket for wall mounting of test gas bottles of gas of 34, 58 and 110 liters.
Release for mounting on gas bottle for testing or calibration of gasdetection devices. To use in combination with dockung station.
Sign according GHS normation in self adhesive polyester: acute toxicity. Size: 100x100mm. 4 labels per card. No PPE.
Black/yellow striped pole with plastic base. Height: 900mm.
Head protection in Tecaweld for Speedglas 9100. Not separately certified as PPE.
Sweat band for air caps, S-133, S-333, S-433 and S-533.
Lightweight breathing hood made of WEB 24 with PE visor. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
Rain trousers, Flexothane, Elasticated waistband with drawstring, Wide legs with zips to give extra room over forestry boots.
Absorption roll 38 cm x 46 m. Material: 100% polypropylene. Features: heavy duty, white padded absorbent, with high absorption capacity and low-lint, does not take up water, very economical to use, absorption capacity 94 litres, weight 6.8 kg. Application: for practically every industrial application.
Spill truck XL for absorption of chemical liquids with content: 20xHAZ124 - 1000421136xHAZ412 - 100421016xHAZ1818 - 1004213150xUN100-E - 1004202
Antistatic absorption clothes on a roll with dimensions 48 cm x 44 m, every 46 cm perforated. Package: in a bag. polipropylene. Ideal to absorb all industrial liquids, including oils, water, solvents and cooling solvents. Capacity: 192 liter per 2 rolls. Convenient for all industry types.
Lanyard without absorber 2M carabiners
Galvanised emergency shower for vertical installation with stainless steel spray head. Shower head with self-regulating 76l/min flow regulator. Axion shower with rotating spray movement for better decontamination. Stainless steel pull handle. Pictogram SP177 included. No PPE.
Stainless steel cover that protects the eyewash heads as well as the bowl.
First Aid box white painted metal, wall model, double-door with lock and key. With 2 handles. Removable interior shelves Dimensions: H.53cm, W. 53cm, D.19cm.
Inflatable splints Pneumasplint. Set of 4 splints packed in inflatable bag, such as to be used as a cushion. (leg, arm, hand and fo ot)
Back Pack Trauma Bag: Emergency supplies carried in on your back. Reflective trim. Material: polyester.3" padded shoulder straps w/refletive striping and phone hold. First aid supplies not included.
Disposable overpressure suit for connection to compressed air net. Equipped with large visor for a wide field of vision. Panic strip ensures that it can be removed extremely quickly. Equipped with CEJN series 341 coupling. Suit made of blue lamination with fixed gloves Kemblok.
Evaporative Cooling Vest: Soak in cold water, and enjoy cooling relief and comfort. With V-neck with zipper closure, nylon outer layer, polymer-embedded fabric inside, water-repellent liner and black cotton- poly elastic trim. Washable.
Replacement hood for breathing hood S-855E in PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Ambidextrous black neoprene wrist support with reversible hook and loop strap. No PPE.
Holder for plastic blades, rectangular plastic scrapers, to scrape surfaces without damaging them. Single holder supplied without blades. Offer with replacement blades: 1021522 for delicate surfaces
Ergonomically styled Cutter for use with plastic sheeting and foamed material. For use by right- and lefthanders. The TEFLON®-coated metal base slides readily across any surface for controlled cutting operations. Blade change within seconds. OPTICUT No. 437: with hold-down clip designed to prevent material build-up ahead of the blade edge and to keep fingertips SAFELY away! Push-cut model. OPTICUT No. 436: with reversed hold-down clip. Pull-cut model. OPTICUT No. 435: Same as No. 436, but with additional lateral protector. Replacement blades: 1014310
A handy Scraper made of plastic with retractable single-edge razor blade. "GS - TESTED FOR SAFETY". No PPE. Replacement blades: 1019408.
These No-Hole interrupter locks are extremely versatile and easy to install due to patented thumbscrew design. You do not need a scr ewdriver. Simply secure the lock firmly to the switch, pull the clamp over the thumb screw and lock to prevent the clamp from loosening. Removable fittings (included) extend the number of useful power interrupters. Suitable for padlock brackets with diameter up to 7 mm
Spray for the cleaning and rinsing dust and dirt from eyes and wounds. The spray provides a gentle stream of moisture and has a total rinsing time of 5 minutes. The spray can be used several times and is sterile to the last drop. Contains 150ml sterile saline solution 0.9%NaCl. Environmentally friendly propellant. Fits in the first-aid station.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Sizes: S - XXL.
220 gsm, 100% nylon, 6-panels, 3M reflective contrast trim on peak , tear release fastening. Colours Orange and Yellow EN 471 certified.
Half ice-grip overshoe made of supple, stretchable rubber for simple attachment over safety shoes. The sturdy metal studs provide a firm, powerful grip and stability on snow and ice. Can be used in temperatures to -40°C.
Replacement visor for Vision Plus helmet. Has a anti-scratch and anti- fog coating.
Batteries 4AA alcaline for head and hand light CPO ATex (1015073).
Stainless steel wall holder for box of disposable gloves. Dimensions: width 255mm x Height 132 mm x Depth 85 mm.
100 long plasters measuring 18cmx2cm.
Replacement power adaptor for GasAlert-devices.
Secubox maxi without symbol. Dimensions: 236x315x200mm. With fixation material. No PPE.
Safety helmet made of ABS, fitted with a 4-point textile suspension with slip adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.
The 3M™ Headgear G500 provides a versatile and comfortable solution for wearers who require both face and hearing protection. With special design features making it easy to combine the headgear with other 3M safety product such as face shields, passive earmuffs or communication headsets and integrated eyewear.
Anchorage for I-beams ranging from 6.35 to 30.48 cm. Maximum thickness of beam 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Replacement knife for scrapers Schaber. Packed per 10 pc.
Red steel, lockable fireproof box for storing safety register. Dimensions: W 34 cm H x 6 cm D x 25 cm. Clearly indicate when ordering whether print must be in Dutch or French.
Very comfortable fall protection harness with 2 attachment points on the back and chest, positioning belt and D ring at the navel for descent. Full D chest anchor point. Leg and shoulder straps are easily adjustable. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps fitted with quick release belts. Straps made of wear and abrasion resistant Repel webbing. Harness is very easy to put on. Integrated fall indicator.
Welding glove in cowhide split leather, lined with Kevlar seams. Length 34 cm. Sizes 8, 9, 10 and 11.