BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
PVC glove on cotton support, seamless knitted with complete PCV coating. Length: 300mm. Thickness: 1,63mm. Sizes: 8/M-11/XXL.
J-Energy series. High shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, pol yurethane insole with textile layer. Sizes: 38-48.
Upper made of PU, fixed strap, PVC outsole.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Lined winter glove with PU palm and waterproof membrane. Back is made of stretchy spandex material in yellow Hi-Vis. Safety cuff. Fully lined with soft fleece material. Sizes 8-12.
Further perfected version of this low-cutsafety shoe that has been a standard for years. The combination of topgrain hide leather, synthetic lining, the extra-wide width and the self-cleaning andimproved sole profile makes Muscat an exceptionally comfortable, robust,low-cut safety shoe. In addition, a new antistatic and antibacterial insole with integrated gel cushion provides optimal shock absorption. Sizes: 35-48.
With the Druten sweater you will feel comfortable even in hazardous working situations as it provides protection against the risks of electrical flashover, against heat and flame, flamespread and static electricity. This navy sweater is finished with a small stripe segmented reflective tape and 2 side pockets with zip closure. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 14,8 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN ISO 14116 : 2015 / IND.3 and EN 1149-5 : 2018.
Boot in white PU, durable and lightweight, with steel toecap. Liner in textile, inlay in micro cellular latex with felt layer. Outsole in PU, with good antislip resistance (SRC). Temperature resistant up to -40°C and +100°C, oil, fat and fertilizer. Good chemical resistance, better antislip profile, higher toecap and bigger fit.
J-Energy series with Adidas Boost Technology. Low hygiene shoe in microfibre, with minimal seams. With protective synthetic toecap, synthetic antiperforation sole, comfortable Infinergy sole (PU/E-TPU) and Polyjal insole for optimal absorption of perspiration moisture. Elastic closure under protective tongue. Lining in non-woven textile.
Low-cut safety shoe in grey velour leather with perforated upper foroptimal ventilation. Fitted with a perforated steel toecap and s teelantiperforation midsole. With hygienic Cambrelle lining and resilient dual density Softane walking sole. Sizes: 36-47.
Seamless knitted Kevlar glove, with palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish.
J-Energy series. Low shoe in nunuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breat hable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Charlotte clip, polypropylene, latex free, diametre 53 cm, 10gr. / M², elastic closure, Available in: blue, green, white, red. No PPE.
Knitted bleached cotton, fourchette style, hemmed edge, standard version, sizes 7-12. No PPE
High shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49.
Cut resistant glove without seams with black silicon-free PU coating. The coating gives a good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, dueto very dens knitting, a very high cut resistance. Usage: Situationswhere adhesion, cut resistance, tear and perforation are required, suchas packaging, assembly, the automotive industry, the glass and paper industry.
Bomber, 100% polyester, 300D Oxford weave, with stain resistant finish, 190gr/m² PU coated. Detachable fur liner, removable sleeves and detachable collar, ID-pocket, security sleeve pocket.
Cut resistant glove made with the latest Dyneema® Diamond technology and a gray, abrasion resistant PU coating. Guaranteed cut resistance (level B) combined in a lightweight glove. (up to 30% lighter). A "breathable" glove, finger-sensitive and a good grip make this a comfortable "second skin". No use is made of glass fiber. According to EN388: 2016: 4.4.4.2.B
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
Glove in water-repellent cowhide leather that should be worn over electrical gloves as mechanical and puncture protection (not mandatory for composite models). More spacious model that easily fits over electrical gloves with a velcro closure for an ideal fit. Check the technical datasheet to determine the correct size.
A glove with high finger sensitivity provided with a nitrile foam coating on a dark gray medium gray nylon. Made upon the principle: Hybrid Coating Technology. Resistance abrasion perfect and very comfortable to wear. The lining extends to the joints (knuckle coated = KC). The glove is also Oil fugue, more resistant than the PU and is also more resistant when heating the PU. Ideal for any activity where sensitivity in the fingers is necessary as the assembly, assembly, packaging, automotive, etc.. Sizes available: 7-11.
Signa fleece in 100% polyester with navy sleeve ends and band around the lower body, 300gr./m², anti-pill finish, can be worn separately, zip closure, two pockets and a comfortable inner lining. Available in: fluo orange/navy, fluo yellow/navy. Sizes: S - XXXL.
High shoe in black waterproof full grain leather, with lining in textile Sany-Dry. Equipped with a non-metallic 200J toecap and non-metallic antiperforation insole. The laces are protected by a spark-resistant leather cover. AIR antistatic insole provides stability. Abrasion resistant outsole in PU/Rubber, resistant to hydrocarbons and temperatures up to 300°C. Antistatic. Sizes: 39-48. Weight: 710g. ISO 20345:2022 S3S HI CI HRO LG SC FO SR
Low-cut, sporty safety shoe in nubuck leather with steel toecap and antiperforation midsole. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Leather insole and padded tongue.
Jacket, Guardian H²O polyester, 260 gr/m², zipper under flap, lined, hood also available. Concealed zipper and velcro closure at centre front, chest pockets with safety flaps and velcro closure, inside pocket at left hand side, goggle pocket behind storm flap, lower pockets with safety flap, lower side entry pockets with blind zipper closure, adjustable velcro closure at cuffs, adjustable puller at hem, fully taped seams, reflective striping.
Low-cut, black safety shoe in smooth full grain leather with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: D (35-49), XD (37-49).
Seamless waterproof nylon glove with thin double nitrile coating. Good dexterity, grip and elasticity because of lining. Length: 30cm. Antistatic, latex and silicone free, food approved .
Comfortable helmet for work and interventions at height and difficult to reach locations. Is fitted with extra-sturdy chin strap closure so the helmet remains in place during a fall. This helmet has no obstructive sun visor, which would obstruct sight while climbing on constructions and manoeuvring through small spaces. Made of indestructible, durable,lightweight polycarbonate. High energy absorbing capacity upon impactduring a fall, both on the top and side of the shell. Equipped with attachment points for helmet mounted light as well as face and hearing protection. Lifetime: 10 years. Universal size, range 53 to 63 cm.Weight: 465 g. Available in: yellow.
ABEK1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5 935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%. Suitable for : processes involving chemical risks.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Full peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: blue, red, green, black, navy blue.
Durable quality leather welding gloves in red cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 9-10-11-12. Length: 35 cm. welding.
High shoe in waterresistant black nubuck leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/VIBRAM, SRC antislip. Sizes: 39-47.
Boot in black water repellent full grain leather, with a warm fleece lining. The boot has an easy zip on the inside. Fitted with a steel perforation sole and 200J toecap. The toecap has an extra protection layer. Antistatic insole with moisture control system for a comfortable feeling. Equipped with a shock absorbing insole from Uvex 3D Hydroflex. Outsole in PU 2 densities, specially shaped for better slip resistance. Sizes: 38-50.
Hazmax S5 safety boot in ultra chemical resistant material with steel toecap and steel antiperforation sole. Removable, washable insole. Vulcanised rubber sole, oil resistant, non-slip and heat resistant up to 300°C (contact heat). With shock absorbent tunnel system in the heel. Colour: green. Available: 35-47.
High shoe in microfiber, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-49.
Grey safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Comfortable nose bridge. Integrated side, bottom and top protection with indirect ventilation.
Supported blue natural rubber glove. Seamless made for comfortable wearing. Wrinkled finish on the hand for perfect grip in wet and dry conditions. Very smooth and very good dexterity. Ideal for use in the fishing industry, oyster fishing, cleaning, chemical cleaning, wet and dry use and general use with food.
Boot in black PU, durable and lightweight, with synthetic antiperforation sole and toecap. Liner in textile, inlay in micro cellular latex with felt layer. Outsole in PU, with good antislip resistance (SRC). Temperature resistant up to -40°C and +100°C, oil, fat and fertilizer. Good chemical resistance, better antislip profile, higher toecap and bigger fit.
Boot made out of PVC. Provided with steel toecap and steel mid-sole for impact and penetration protection. Colour: green. Norm: EN345.S5. Sizes: 36 – 48.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 5,000 volts, operating voltage of 1,000 volts. Length 41 cm, Sizes: 7-12.
High-cut basic safety shoe S3 in leather with a steel safety toecap and antiperforation midsole. Cambrelle lining and synthetic PU t ongue. Padded ankle protection, gusseted closure. PU/PU walking sole: suple and lightweight, oil resistant.
High quality red nitrile glove, 38 cm long and 0.425 mm thick. Solvex offers superior resistance to particularly hazardous applications in the chemical industry. Hence the success of this glove in the chemical, petroleum and paint industries, in relation to the transportation and processing of hazardous, corrosive substances and for working with detergents and solvents. Antistatic, silicone free.
Trousers A2058687 in 65% polyester 35% cotton, 245 gr./m²,industrial washable and dryable, two inserted pockets. Available colours: Navy/Royal Blue, Royal/Navy, White/Grey, Grey/Navy, Black/Grey, Green/Khaki. Available sizes: 36-64.
Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.
Gloves made of sturdy, top-quality cowgrain leather with wplit leather back. Has a perfect fit, reinforced seams along the fingers and high tactility.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
Gloves with American cut, with heat resistant cowsplit leather (to 350 ° C), lined with molton wool around the hand and the cuffs, veinprotection, cuffs made of natural split leather with Kevlar seams.
Super-light (300 g) safety helmet made of strong ABS. With 6-pointtextile suspension (52-64cm), a handy ratchet and highly absorbenthydro-flock sweatband. This version has extended neck protection withoutventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Available in: white, yellow, blue, red, green, orange.
T-shirt, 100% combed cotton, 145gr/m², sturdy four-layer rib collar
The socks have excellent insulating functions and retain heat even when wet. They absorb and transport perspiration away from the skin without losing their function of heat retention. Socks have terry knit feet and rib knit shafts. Merino wool 64%, Polyamide 35%, Elastane 1%. Sizes: 36/39, 40/44, 45/48. No PPE.
Black powder-free biodegradable 100% nitrile glove. Completely silicone free. Chlorinated glove to offer more comfort and to reduce tackiness. Antistatic. Package size XXL : 90 pieces.
Low safety shoe in microfibre with synthetic antiperforation sole and a steel toe cap. With BOA closing system. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
High-tech ambulance sweater with stand-up collar, segmented reflective bands and adjustable closure. Quality: 70% polyester / 30% cotton, 310g / m². Color: fluorescent yellow / enamel blue. Available sizes: XS-3XL. Conforms to: EN ISO 20471 Class 2.
Earmuff X2 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 31dB.
Safety knife with laminated single blade, sturdy and functional For cutting double cardboard, paper, foil and straps. The single-sided blade can easily be reversed and replaced. Replacement blade always available in holster. Replacement blades: 1025552.
Safety knife with automatic blade retraction. Suitable for left- and right- handed people. Aluminium handle with renewed and simple blade change. Cutting depth: 21mm. Replacement blade: 60099 (1021313). No PPE.
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Fitted with a breathable GORE-TEX liner. Outsole in PU/VIBRAM rubber, SRC antislip, oil and carburant resistant. SOFT insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. A natomical, perforated. 100% metalfree. Sizes: 38-47.
Water and chemical resistant high shoe in coated leather, with a steeltoecap and antiperforation sole, waterresistant padded tongue. Anti-transpirant liner in Sympatex membrane Airflow. Leather insole, outsole in nitrile and polyurethane, oil-, petrol- and acid resistant, antistatic and antislip. Colour: black/grey. In line: ISO EN 20345 S3 HRO SRC.
Low shoe in microfiber, with a synthetic antiperforation sole and metal 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Towel 100% cotton, 400 g/m², 70 x 140 cm. Available colors: White, black, red, light blue, royal blue and gray.
Ultra-thin, antistatic gloves with polyurethane coating on palm and seamless lining on the back. Excellent tactility.
High shoe in waterrepellant black pull-up leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D-meshmaterial. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Polyurethane insole Soft+ Gel with textile layer. 100% metalfree. Sizes: 35-47.
ABEK2HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives<(>,<)> formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 2 gas filter: for max. concentration of 0.5%.
Contemporary work trouser that fits as good as it looks. Made from durable poly-cotton canvas fabric and includes triple stitched seams, these trousers have been built to last. Innovative design features like stretch panelling provides excellent comfort and flexibility in key movement areas. Other practical features include high rise back waistband with side elastication, knee pad pockets offer extra protection in all working conditions and multiple pockets provide secure storage. Quality: 65% polyester / 35% cotton. Available sizes: 28 - 48. Available colors: Gray and blue.
Tracker II hybrid safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below, and is ventilated laterally and at the top. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti- fog coating.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Duolens glasses with modern fashion-look. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with twist temple technology for a perfect and non-slip fit. Polycarbonate lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to filter material that is added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. Frame: black/green.
Full facial mask in very comfortable and high quality elastomer. Anti- vapor Polycarbonate visor with wide field of view. Fitted with EasyLock connection on the side of the mask for filters with similar connections: serie 9000. Without speaking membrane. The harness opens very widely, which makes it easy to put on the mask. Weight: 360g.
Heat resistant safety helmet made of fibreglass reinforced polyester. The high-quality helmet maintains its shape to 500 °C and has a 6-point textile suspension, leather sweatband and wheel ratchet. Available in: white, yellow, blue, red, green, orange.
Protection film for screen as accessory of hoods M-106, M-107, M-306, M- 307, M-406, M-407. No PPE.
Overshoes, Micromax, elastic, PVC non-slip sole. Suitable for : agricultural and food industry. Colours: white. Sizes: XL= 31cm.
