BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Bodywarmer, Guardian H²O, flame retardant, anti-static, zipper under flap, porto phone pocket, 2 lower pockets with velcro closure.
Trousers, Guardian H²O polyester, flamretardant, anti-static, water and windproof, elastic in waist, 2 pockets, reflective tapes.
Every day in many industries, people are sustaining hand and finger injuries that are preventable. Using the correct safety devise should be an essential part of everyday life. If you are working in areas where objects could hit you on the head, you would wear a hard hat. If your eyes are at risk from foreign objects or wind blown particles, you would wear safety glasses. Think about your hands in the same way! Be sure to keep them safe and out of harms way, be sure to use the Fingersaver, don’t take risks with you hands.
Low shoe OB in waterproof, perforated full grained leather. Lining in mesh and PU foam. PU / Nitrile sole with good anti-slip. Removable Enduromax insole with good air circulation and heel support. Sizes: 38 - 47.
Traditional sticking plaster in skin colour with carrier in textile. Fast application on all parts of the body. To cover and protect small superficial wounds. Dimensions: 2.5cm x 5m.
Face seal for 9100 AIR hoods.
Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Cover for TR-600 can be combined with filter TR-6310E.
3M™ Solus™ 1000 is an adjustable safety spectacle. It has a Scotchgard anti-fog layer which protects longer than a normal anti-fog layer. Marking: 2C-1.2 1 FT KN.
Safety scissors 25cm in stainless steel, high quality Easy to clean. Cuts paper and fabric but not the skin Safe round tip. Also suitable for the food industry
Cooling vest based on PCM technology to prevent heat stress and fatigue in very hot environments. Provides constant cooling choosing from 3 different temperatures. Outside material: robust canvas with inner polyester mesh lining. 4 pockets for coolpacks, adjustable waist and front zip closure. 15°C cool pack included. Available sizes: S-3XL. Available colour: black.
Flame retardant and antistatic fleece in 50% Protex/32% cotton/16% polyester/2% negastat (AST) (350g/m²). Full zip closure, straight collar, 2 front pockets with zipper, elongated back. Available sizes: S- 3XL. Available colours: navy.
Creamy handwash foam for stressed skin. Contains moisturizing conditioner, aloe vera and glycerin. Skin neutral pH and citrus perfumed. Contains 1000ML. Suitable for showering. With Ecolabel.
Dispenser for use of 2000 ml Protect soft bottles.
Compact knee pad with handle for easy carrying or storage. Colour: Orange. Dimensions: 20cm x 46 cm x 2.5 cm. Not PPE.
Duolens glasses with modern fashion-look and extra eyebrow protection. Size is between the Pheos and the Pheos S. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non-slip components. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. Frame: white/black.
High shoe in black fire-resistant full grain leather, fitted with a steel toecap and non-metallic anti-perforation midsole. Lining in leather heat resistant seams and a full, padded bellows tongue. Outsole in PU/Nitrile, SRC anti-slip resistant to fats and oils. Fitted with a PU scuff cap. Protection against molten iron and molten aluminium. Sizes: 38-50.
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
High ranger shoe in waterproof leather with metal toecap and metal anti-perforation sole. PU / PU sole, with added PU raised toecap. Fully padded water-tongue. Contains a Gore-Tex membrane. With chainsaw protection class 2. Sizes: 38-48.
Low shoe in synthetic PU. Fitted with a breathable, abrasion resistant liner in mesh. Outsole in EVA/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole. Sizes: 35-42. No PPE.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with 2 Skalt Comita aluminium hooks with 20 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
High ranger shoe in Hypertex with Putek technology, with a synthetic antiperforation sole and steel toecap. Fitted with a breathable, waterresistant Tepor membrane. Outsole in Vibram, oil and carburant resistant. Has chainsaw protection class 2. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Waterproof goggles with PC lenses. Contains an isoprene strap and TPR comfort seal. Equipped with a Platinum coating.
Oval carabiner made of aluminium Manual closure of the locking mechanism. Opening: 20 mm. Resistance: 25 kN. Weight: 92g.
Extreme comfort and protection in high cut risk applications for increased compliance and an uninterrupted workday. The Intercept™ Cut resistant Technology provides high levels of protection against lacerations. Lightest weight design for comfort and dexterity, su pporting worker use compliance. High abrasion resistance delivers longer product use life. Suitable for use across a wide range of applications and risks, avoiding the need to change gloves when transitioning between tasks. Intermittent handling of hot work items up to 100°C. Latex and Silicone free. Sizes: 6-11.
Winter lined glove in synthetic Serino leather with fleece lining and highly durable PU in the palm. Complemented with a windproof membrane on the back. The Serino also protects against damp and thereby keeps the hands dry. Chomim-free and washable at 40°C. Suitable for outdoor use in maintenance, and construction industries.Sizes 8-11.
Forest trousers with frontal protection type A, fly with zipper - closure with 1 button, 2 inset pockets, 1 patch pocket with zipper, 1 patch pocket for pleat and system for attaching the spark plug wrench, elastic waist with loops for belt and loops for suspenders with velcro. Quality: 65% polyester - 35% cotton lining 85 g / m². Available sizes: XS-4XL. Available colors: Grjis / black.
Cut and heat resistant arm protector 45 cm., with thumb opening. Ergonomic design. Protects for 21 seconds againt 100°C contact heat (test report).
Multinorm RWS trousers with hidden zipper, 2 inset side pockets, back pocket with flap, ruler pocket with flap, thigh pocket with flap, pre-shaped easily accessible knee pockets with opening at the top lockable with flap and Velcro and length seam. Quality: 50% / 49% / 1% polyester / cotton / carbon + DWR, 295 gr / m2. Available colors: Fluo orange. Available sizes: Size range 44-66. Complies with: EN 1149, EN 13034, EN ISO 11611 class 1, EN ISO 20471 class 1, EN ISO 11612, IEC 61482 class 1.
Black fitover safety glasses with pressure-free fit and hinge (foldable). Very light, fits over most prescription glasses. Frame in synthetic material and CBR65 polycarbonate lenses with integrated side shields. The innovativetemple concept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With Supravision Excellence coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Low shoe with upper in hydrofugated, breathable, abrasion resisitant fabric (PES + Microfiber) Fitted with a Gore-tex liner. VIBRAM Outsole, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-48.
Low shoe glove in water repellent black Matryx multi-fibre. With an aluminium 200J toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement. Inner lining in breathable textile and insole in polyurethane foam. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The Melfi looks like a simple navy blue sweater with long sleeves, but it protects you against industrial hazards such as arc flash, heat, flame, and flame spread. This sweater with arc protection has a round neckline and elastic hem and wrist bands. Simple but effective. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (17.8 cal / cm²), EN ISO 14116.
Softshell vest without sleeves: • two side pockets with zippers; • chest pocket with zipper; • two inside pockets; • hidden button band with chin guard on top; • adjustable waist. Quality: 96% polyester, 4% spandex. Available sizes: XS - 5XL. Available colors: black, navy, dark gray, green, sky blue and red.
The light and elastic Herford coverall has a fixed hood, a zipper concealed under a double flap with press studs and sleeve and ankle narrowing by means of press studs. The durable Flexothane® fabric protects you against rain and wind. Moreover, this smooth coverall is machine washable. Available sizes: S-3XL. Available colours: Green and navy.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements M-Move - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
The Croston jacket with its heavy canvas construction is highly suitable for harsh working conditions as it also has a good abrasion resistance: Straight collar; Foldaway hood in collar; Zip closure under flap with touch <(>&<)> close fastening; 1 patched chest pocket; 2 inset pockets with flap; 1 pen pocket; Round inset sleeves; Elasticated wristband with narrowing by touch and close fastening; Elasticated waist and narrowing by press studs at the sides of the waist; Elongated back tail; Detachable lining. Quality: 100 % polyester fabric with 100 % PU laminate; ± 260 g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo orange/navy.
100% polyester (420D) with waterproof PVC lining large main compartment Two pockets at the ends Large front pocket Reflective stripes on three sides Reinforced handles with Velcro Adjustable shoulder strap Content: 75 liters Dimensions: 68 x 35 x 32 cm Maximum embroidery: 14, 15, 20 round hoop Pressure surface: 35 x 20 cm, 28 x 22 cm, 38 x 32 cm Available sizes: Universal. Available colors: Navy and black.
Beannie for wet weather conditions. This hat has a 100% membrane for perfect protection but is breathable at the same time. The micro fleece lining provides warmth and comfort. Quality: Outer fabric: 100% Acrylic, Knitted 1g. Lining of the fabric: Insulatex Lined 40g. Extra information about the contrast fabric: Porelle Membrane. Available sizes: Universal. Available colors: Navy, black and fluorescent yellow.
Cottover hoody with ribbed cuffs and bottom hem. Inside of the hood in single jersey. Two front pockets. Quality: 80% organic Fairtrade cotton, 20% recycled polyester, 280 g / m². Available sizes: S-4XL.
Flame retardant jacket Laruns with arc protection: Straight collar; Zip closure under flap; 2 patched chest pockets with flap; 2 inset pockets with flap; 2 loops for gas detectors; Round sleeves; Sleeve narrowing; Extended back; Welded, segmented reflective tape. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available sizes: 44-64. Available colors: Navy/fluo yellow. Conform: IEC 61482-2 : 2009 class 1 - ATPV 8.4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E1 F1, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008 and EN 13034 : 2005 + A1 : 2009 Type PB [6].
Flame retardant trousers Barcus with arc protection: Front fly with zip closure; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket; 1 gusset pocket; Elasticated waist; Knee pockets; Waistband with loops for belt. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available colors: Blue/fluo yellow. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Flame retardant softshell Umia with arc protection: Straight collar; Zip closure under flap; 1 patched chest pocket with flap; 2 inset pockets; 1 loop for gas detector; 1 loop for badge; 1 Napoleon pocket; Round sleeves; Sleeve narrowing by touch and close fastening. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colors: Navy/fluo yellow.
Trouser belt in enamel blue for ambulance drivers from 90cm to 145 cm. Clothing sizes - belt sizes: BE 38/40/42 = 90cm BE 44/46/48 = 105cm BE 50/52/54 = 125cm BE 56/58/60 = 145 cm.
Light hearing protector made of a combination of plastic and stainless steel. Very light model with ergonomic design with sealing filled with fluid and foam.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Put togehter with pre filter SR221 on gas, particle, or combined filter. Use also for fit test.
Women's Casma trousers with ARC protection: Closure with 1 hidden button / Front fly with zipper 2 inset pockets with flap and press stud fastening 1 ruler pocket with flap closed by hidden press studs elastic waist knee pockets Waistband with belt loops Double stitched (2x2) flame retardant reflective striping (50mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56. Available colors: Navy. In accordance with: IEC 61482-2: 2009 Class 1- ATPV 15.2 cal/cm², EN ISO 11612: 2015 / A1A2B1C1E3F1, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: 2005 + A1 : 2009 Type PB [6].
High safety shoe in waterrepellant Cordura with synthetic antiperforation sole and a synthetic toe cap. Outsole in PU/PU, including ESD. Has a removable inner schoe. Antislip SRC and choc resistant.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Dark grey hearing protector with HiViz orange element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Flame retardant and antistatic long sleeve t-shirt in 60% modacrylic l/ 38% Lyocell / 2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Service pants in full stretch that provides maximum freedom of movement and comfort. Modern fit. Leg pockets on both sides with zip closure, phone pockets on both sides with Velcro closure. Folding rule pocket on the right side. Internal back pockets. Pre-bent knees. Internal pockets for knee protectors, adjustable in two height levels. Wider belt loop at the back to prevent pressure from belt. D-ring in front. Hidden attachment for holster pockets (ref. article 9042). Hidden button at front. Material:1: 65% polyester, 32% cotton, 3% EOL - 220 g/m2 Material 2: 91 ,5% nylon, 8,5% spandex Weight:250 g/m² Color comment:navy-58, grey-98, black-99 Gender:Men
Low shoe in waterrepellant microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in polyester. Outsole in EVA/Rubber, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
This premium quality welding trouser is made from split cowhide leather and stitched with para-aramid thread. It offers enhanced protection to the wearer when welding and is designed to last in the toughest environments. Made with cowhide leather for a premium finish Class 2 welding protection Button front closure Wider belt loops for wider belts Designed to be worn in a tough work environment CE certified UKCA marked Shell Fabric : Split Cowhide Leather, thickness 1.3 mm Available sizes: S - 3XL
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
High shoe in waterresistant full grain leather with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in GoreTex. Sole in PU/Nitril. Sizes: 39-48.
This glove is mainly used for handling smooth goods as well as goods with a sanded surface. Natural latex. Freedom of movement thanks to excellent comfort through extra support. Seamless. With reinforced cotton and grip. High cut-resistance and protection of the forearm. Applications: open sea fishing, forestry, oyster farming, barbed wire handling, glass industry, metal treatment. Sizes: 6-10.
Overshoes,Tyvek®, non-slip sole, antistatic treatment, elastic at the ankles . Available in: white. Sizes: M (36-42), L (42-46).
