BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Short jacket with concealed zip and concealed press studs, 2 front pockets with flaps, 2 inset chest pockets, back pleats for extra freedom of movement, escape mask loop, extra insert at armpits to promote freedom of movement, cuffs with velcro, extended back and reflective tape. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin weave + DWR, 280 gr / m2. Available sizes: 44-66 Havep. Available colors: Black / gray, gray / blue, cornflower blue / navy and gray / red. Conforms to: EN 1149-5, EN 13034, type 6, EN ISO 11611 class 1, EN ISO 11612 A1B1C1E2F1 and IEC 61482-2 (front class 2, rear class 1).
This durable and multifunctional arc coverall features six different pockets on the outside and one on the inside. This model with d ouble-stitched reflective FR strips is made from a very light fabric weighing only 260 g/m². At the same time, the fabric is very breathable and supple, flame-retardant, anti-static and offers you excellent protections against heat and metal splashes. For extra comfort and a good fit the waist can be adjusted, the sleeves can be narrowed by using press studs and knee protection can be pushed into the knee pockets. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Navy. Available sizes: 44-64.
Flame retardant women's chino pants with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Available sizes: 36-48. Available colours: navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
Polo, 60% modacrylic 39% cotton 1% carbon, 200gr./m², flam retardant, antistatic, long sleeve, 3 button placket. Available in: navy, black and grey.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.
Flame retardant ARC T-Shirt with round neck and knitted cuffs. Quality: Cantex Jersey 170AT, 170 g / m². Available colors: Navy. Available sizes: XS-4XL. Conforms to: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5.
Flame retardant coverall in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the overall flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The coverall has increased visibility. Concealed front zip. Two walkie-talkie loops. Chest pockets with flap, right pocket with tool loops and concealed key ring for ID card holder. Side pockets with flap. Height-adjustable knee pockets. Back pockets with flap. Ruler pocket with flap. Adjustable cuffs with press studs. Elastic at the waist. Contrast stitching. Quality: Cantex Stretch, 365 g/m² + Cantex Weld, 365 g/m². Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1B1C1E3F1, EN ISO 11611 A1 Class 2, EN 1149-5, IEC 61482-2 Class 1 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 13034 type PB [6 ].
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
Flame retardant and antistatic poloshirt Bladel with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Round sleeves; Segmented reflective tape (2,5 cm); Back length 74 cm (L). Quality: 55% Protex + 33% cotton + 10% p-Ar + 2% AST; ± 230 g/m². Available sizes: S-3XL. Available colour: Navy.
Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of <(><<)>50%. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection. ATPV: 36cal/cm². Colours: white, yellow, red and blue.
Adapter 3712 for helmets with standard 30 mm slot (1100, 1125, NEXUS). Not for Concept helmets of Centurion.
Balaclava in 44% meta-aramid/42% viscose FR/6% tencel/3% para- aramid/3% antistatic fibre/2% elasthane. Large opening in front for eyes. Available sizes: 1 size. Available colour: paris blue.
Multirisk Softshel Diablo: Invisible zip at the center front; Raglan sleeves; 1 vertical chest pocket; 2 front pockets; 1 inner pocket; 2 slanted reflective bands on the front and back and sleeves; 1 vertical reflective band on each shoulder; Bottom with elastic cord and cord stopper. Quality: 34% MODACRYL, 28% POLYESTER, 21% COTTON, 16% PU, 1% ANTI-STATIC. Conforms to: EN 1149-5: 2008, IEC 61482-2 class 1, EN ISO 14116: 2015 IND 3, EN 13034: 2005 + A1: 2009 TYPE PB [6], EN ISO 11612: 2015 A1 B1 C1 F1, EN ISO 20471: 2013 + A1: 2016 CLASS 2 and EN ISO 11611: 2015 A1 CLASS 1.
Flame retardant jacket Laruns with arc protection: Straight collar; Zip closure under flap; 2 patched chest pockets with flap; 2 inset pockets with flap; 2 loops for gas detectors; Round sleeves; Sleeve narrowing; Extended back; Welded, segmented reflective tape. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available sizes: 44-64. Available colors: Navy/fluo yellow. Conform: IEC 61482-2 : 2009 class 1 - ATPV 8.4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E1 F1, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008 and EN 13034 : 2005 + A1 : 2009 Type PB [6].
Welding vest FR08: Protects against radiant, convection and contact heat; 100% Metal Free; Industrial wash at 75°C and machine dry 155°C; Flame Retardant Industrial Washable Striping; antistatic; Extended back for more protection; Radio loops for easy attachment of a radio; Velcro adjustable cuffs for a snug fit. Quality: Bizflame Ultra: 80% Cotton, 19% Polyester, 1% Carbon Fiber 340g. Available colours: Gray and Royal Blue. Available sizes: S-3XL. In accordance with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1, EN 13034 Type PB [6] and ASTM F1959/F1959M-12 ATPV 16 CAL/CM2 (HAF 83.7%).
Multinorm ladies' softshell Heika with arc protection: Straight collar; Zip closure under flap; 2 inset pockets; 2 loops for gas detectors; Round sleeves; Sleeve narrowing; Elongated back tail; Flame retardant reflective segmented striping (50mm). Quality: 3-layer softshell: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: XS-2XL. Available colors: Fluo orange/navy and fluo yellow/navy. Compliant with: IEC 61482-2 : 2018 APC1 - ATPV 24,3 cal/cm², EN ISO 11612 : 2015 / A1 B1 C2 F1, EN ISO 14116 : 2015 / IND.3, EN ISO 11611 : 2015 / Class 2 - A1, EN 1149-5 : 2018, EN 13034 : 2005 + A1 : 2009 Type PB [6], EN ISO 20471 : 2013 +A1 2016 / Class 2 and EN 14058 : 2017 / Class 1 3 x x.
Overboot against electricity. Sole is produced with a vulcanised rubber and tested against 35000V. Each boot is tested separately against 25000V before getting sold. 100% waterproof and adjustable in height. Easy to pull out, because of V-shackle. In accordance with: EN50321 / EN ISO 20347 OB HRO SRA.
Flame retardant work jacket with increased visibility in a light and comfortable cloth with high tear resistance. Concealed zipper with press studs front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Reflection on the shoulders and sleeves. Completely metal-free. Quality: 811 Tera TX, 260 g / m². Available colors: Yellow / navy. Available sizes: XS-4XL. Complies with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB 6.
Hi-vis coverall Macas with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo yellow/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
Electric Arc hood in softshell fabric with high arc protection. Helmet - Robust helmet with durable shell construction and chin strap. Cooling vents for improved air circulation and comfort. RX0018 - Highly transparent 3Phase® Arc Flash protection lift-front visor. Combined set with Electric Arc hood 9179, integrated lift-front visor RX0018 and helmet with chin strap. Available sizes: Universal. Available colours: Navy.
Flame retardant and antistatic long sleeve t-shirt in 60% modacrylic l/ 38% Lyocell / 2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Trousers, ME - 75% cotton 24% polyester 1% antistatic, 2/2 twill weave, 360 gr/m², zipper, 2 inset side pockets with flap, back pocket with flap, ruler pocket with flap, thigh pocket with flap, elasticated back, legs with adjustable press-studs.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements M-Move - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
The Vaski is a hi-vis ladies rain jacket which also offers a high degree of protection to the wearer. The jacket is made out of a light, but high quality fabric and complies to many international standards such as IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5 and EN 13034. This premium jacket is equipped with a YKK zipper with handy grip for easy opening and closing. The sleeve ends are preshaped and the back is extended for your comfort. Available sizes: XS-2XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Flame retardant trousers Barcus with arc protection: Front fly with zip closure; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket; 1 gusset pocket; Elasticated waist; Knee pockets; Waistband with loops for belt. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available colors: Blue/fluo yellow. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Flame retardant softshell Umia with arc protection: Straight collar; Zip closure under flap; 1 patched chest pocket with flap; 2 inset pockets; 1 loop for gas detector; 1 loop for badge; 1 Napoleon pocket; Round sleeves; Sleeve narrowing by touch and close fastening. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colors: Navy/fluo yellow.
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Multinorm RWS trousers with hidden zipper, 2 inset side pockets, back pocket with flap, ruler pocket with flap, thigh pocket with flap, pre-shaped easily accessible knee pockets with opening at the top lockable with flap and Velcro and length seam. Quality: 50% / 49% / 1% polyester / cotton / carbon + DWR, 295 gr / m2. Available colors: Fluo orange. Available sizes: Size range 44-66. Complies with: EN 1149, EN 13034, EN ISO 11611 class 1, EN ISO 20471 class 1, EN ISO 11612, IEC 61482 class 1.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey and fluo yellow/navy. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
The Melfi looks like a simple navy blue sweater with long sleeves, but it protects you against industrial hazards such as arc flash, heat, flame, and flame spread. This sweater with arc protection has a round neckline and elastic hem and wrist bands. Simple but effective. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (17.8 cal / cm²), EN ISO 14116.
Women's Casma trousers with ARC protection: Closure with 1 hidden button / Front fly with zipper 2 inset pockets with flap and press stud fastening 1 ruler pocket with flap closed by hidden press studs elastic waist knee pockets Waistband with belt loops Double stitched (2x2) flame retardant reflective striping (50mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56. Available colors: Navy. In accordance with: IEC 61482-2: 2009 Class 1- ATPV 15.2 cal/cm², EN ISO 11612: 2015 / A1A2B1C1E3F1, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: 2005 + A1 : 2009 Type PB [6].
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. Available sizes: 44-64, 84-120, 146-156 SCA. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Helmet liner in flame retardant material. Fits between the helmet shell and the interior, for warmth without compromising on comfort. With zipper connection to the frost neck cape.
Signaling shirt with ARC protection that feels soft and comfortable. This shirt is inherently flame retardant <(>&<)> antistatic with good moisture management properties. Quality: 54% modacrylic + 44% cotton + 2% AST; ± 180 g / m². Available colors: Fluo yellow / navy. Available sizes: S-3XL
Flame retardant and antistatic ladies pants in strong inherent flame retardant material with an increased visibility at the bottom of the legs. Concealed zip, 2 deep side pockets, 2 back pockets with flap, folding ruler pocket, separate leg pocket and knee pockets. Available sizes: 36-46 EU. Available color: navy. Compliant with: EN ISO 11612 A1A2B1C1E3F1, EN 1149-5, EN ISO 11611 Class 1, EN 13034-6, IEC 61482-2 Class 1 (ATPV: 15 cal / cm²) PPE category 3.
Multirisk trousers with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, elastic at the waist. Quality: 79% / 20% / 1% Kat / Poly / AS. Available sizes: 44-66 HAV. Available colors: Blue / gray, gray / yellow and black / gray. Conforms to: EN 1149-5, EN 11611 class 1 A1, EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
Flame retardant work jacket in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the work jacket flexibility and offers freedom of movement and high comfort, while Cantex Weld at the front offers extra high protection against welding and grinding spatter. The work jacket has increased visibility. Concealed front zip with press studs. Extended back. Two walkie-talkie loops. Chest pockets with flaps, right with tool loops and concealed key ring for the ID card holder. Left vertical chest pocket with zipper. Spacious slit pockets with flap. Cuffs adjustable with press studs. inner pocket. Contrast stitching. Quality: Cantex Weld, 365 gsm. Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Kit for helmet with Contour screen in grey high transparency tint, Contour carrier and chin-guard. Uses nano-particles to protect against mechanical, heat, and radiation risks in the event of arc due to electrical errors.
3-layer softshell: polyester fabric + breathable FR PU + inherent FR Fleece ; ± 365 g/m², Softshell ARC protection Class 1 Conform to new FR standard EN ISO 11612, High performance lightweight fabric, windproof, highly breathable, Waterrepellent outer fabric, Comfortable, Supple, Good cold protection, Stitched seams Straight collar, Zip closure under flap with touch <(>&<)> close fastening, 1 inset chestpocket with zip closure, 2 inset pockets, 1 loop for badge, Round inset sleeves, Sleeve narrowing by touch and close fastening, Back length 75 cm (L), 1 inside pocket.
Extremely flexible goatskin work glove, designed for tough, hot working environments. Upper reinforced with heat resistant meta-aramide fibres and reinforced knuckles. Inner hand lined with para-aramid, which also provides cut protection level B, and reinforced externally for enhanced protection. Heat resistant double stitched seams. Sizes: 7-12.
Hi-vis offshore trousers Ambok with arc protection: Front closure with zip; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 1 ruler pocket with flap; Elasticated waist; Knee pockets; Waistband with loops for belt; Double stiched (2x2) flame retardant reflective striping (70mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available sizes: 44 - 64, 48S-58S and 46L-56L. Available colors: Fluo yellow/navy.
High performance multinorm rain trousers with leg narrowing by press studs and elasticated waist. Quality: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Colour: Navy. Available sizes: S-3XL.
Flame retardant Hi-Vis work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the work trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have nail pockets. Quality: Cantex Stretch, 365 g/m². Available sizes: 44-64, 146-156, 84-120. Available colours: Fluo yellow/navy. Complies with: EN ISO 11612 A1.A2.B1.C1.F1, EN 61482-2 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 1149-5 and EN ISO 20471 class 1.
The balaclava protects body parts that are normally exposed in a protective clothing system. The flame-retardant properties of the fabric offer good protection not only from the cold, but also from heat and flames. The 1:1 rib quality creates a thin, yet protective product. Available sizes: Universal. Available colors: Grey.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Flame retardant and antistatic signaling fleece with arc protection. Upright collar; Zipper under flap with velcro fastener; 2 inset pockets with zipper; Rounded-in sleeves; Elastic in sleeve end; Elastic cord in hem. Quality: 54% Modacrylic + 34.2% FR cotton + 10% polyamide + 1.8% AST; ± 310 g / m². Available sizes: S-3XL. Available colors: Fluo yellow / navy. Compliant with: IEC 61482-2: 2009 class 1 - EBT 10.7 cal / cm², EN ISO 11612: 2008 / A1 B1 C2 F1, EN ISO 14116: 2008 / Index 3 / 25H / 40, EN ISO 20471: 2013 / Class 2, EN 14058: 2004 / Class 1 xxxx and EN 1149-5: 2008.
Very flexible and comfortable, yet this blouson offers a class 2 ARC protection. The breathable fabric has inherently flame-retardant and at the same time very good moisture-regulating properties. The blouse is also shrink and lint resistant. The 2 patch pockets are nicely finished with a reflective piping. The extended back also ensures a comfortable feeling. Quality: 65% Lenzing FR - 22% AR - 12% PA - 1% AST; ± 250 g / m² - 64% Viscose FR, 35% Aramid, 1% AST; ± 150 g / m². Available sizes: 44-64. Available colors: Marine. Conform: IEC 61482-2: 2009 class 2 - ATPV 22.0 cal / cm², EN ISO 11612: 2015 / A1 A2 B1 C1 E1 F1, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008, EN 13034: 2005 + A1: 2009 Type PB [6].
Stylish multinorm HI-VIS softshell with hood. Quality: 60% modacrylic, 38% polyester and 2% carbon, 350 gr / m². available sizes: XS-5XL. Available colors: Hi-vis yellow/navy. Compliant with: EN-1149-5, EN ISO 20471 class 2, EN ISO 11612, EN 13034, EN ISO 11611 and IEC 61482.
These hi-vis trousers stand out with their double-stitched reflective FR strips and fluorescent colour. Extremly light with high protection. These trousers with arc protection are anti-static and offer excellent protection against heat and metal splashes. In addition, these comfortable and practical trousers with five pockets are made from a light, inherently flame-retardant, breathable and supple fabric with moisture-regulating properties, harmless to the skin. Available colors: Hi-Viz orange/navy. Available sizes: SHORT 48 - SHORT 58 - REGULAR 44 - REGULAR 64 - LONG 46 - LONG 56.
The Corran is a trendy hi-vis sweater with segmented reflective tape that offers ARC protection. The bi-colour sweater is equipped with 2 side pockets with zip closure and has anti-microbial properties. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Fluo yellow/Navy. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 14,8 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN ISO 14116 : 2015 / IND.3, EN 1149-5 : 2018 and EN ISO 20471 : 2013 +A1 2016 / Class 2.
Trousers Hanfeld with arc protection: Front fly with zip closure; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 1 ruler pocket with flap; Elasticated waist; Waistband with loops for belt. Quality: 65% Lenzing FR - 22% AR - 12% PA - 1% AST; ± 250 g/m². Available sizes: 44-64, 48-58 short, 46-56 long EU. Available colors: Navy.
Multinorm parka with arc protection: Straight collar; YKK zip closure under flap; 1 patched chest pocket; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Flame retardant reflective tape. Quality: 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Safety helmet with integrated face shield (class 2) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap, neck and earflap protectio and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Hi-vis rain jacket ARC protection Class 1, SIO-SAFE Aqua 310: 2-layers laminated tissu: 60% FR modacryl - 40% cotton (<(>&<)> AST) ripstop with PU laminate ± 310 g/m², High performance laminated fabric, Highly breathable, Taped seams, Different linings/fleeces can be zipped in, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 1 patched chest pocket, 2 patched pockets, 1 napoleon pocket, 2 loops for badges, Round inset sleeves, Elastic at end of sleeves with narrowing by touch <(>&<)> close fastening, Back length 85 cm (L), Fixed flame retardant cotton lining, 1 inside pocket, Zipper in back lining for placing logos.
Hood in 100% polyester with Gore®Pyrad® textile technology (ePFTE membrane). Laminated, to be combined with parka Ebro. Available sizes: S-3XL. Available colours: hi-viz yellow, hi-viz orange, hi-viz red.
Hi-vis polo shirt with ARC protection: Lay flat collar; Closure with hidden buttons under flap; long sleeves; Welded segmented reflective tape. Quality: 54.5% modacrylic + 44.5% cotton + 1% AST; ± 220gsm. Available sizes: XS-3XL. Available colours: Fluo yellow/navy. Complies with: IEC 61482-2 : 2009 class 1 - EBT 7.4 cal/cm², EN ISO 11612 : 2008 / A1 B1 C1 F1, EN ISO 14116 : 2008, EN ISO 20471 : 2013 / Class 2 and EN 1149-5 : 2008.
Coverall Force+ with concealed press stud fastening, 2 inset side pockets, 2 thigh pockets with flap, 1 breast pocket with flap, 1 back pocket with flap, knee pockets, elastic in back, sleeves with adjustment press studs, reflective tape on shoulders, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS Available sizes: 44-66 Havep. Available colors: Blue / gray. Conform: EN 1149-5, EN 11611 class 1 A1 (front class 2), EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
Offshore work jacket Ramea with arc flash protection: Upright collar; Hidden popper fastening; 2 patched breast pockets with flaps; 2 patched side pockets with flaps; 2 loops for gas detectors; Sleeve narrowing by means of press studs; Extended back. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g / m². Available sizes: 44-64 EU. Available colors: Navy. Conforms to: IEC 61482-2: 2009 class 1 - ATPV 9.4 cal / cm², EN ISO 11612: 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116: 2015, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: type PB [6].
This multinorm Dapro coverall is tough and comfortable. The coverall has an adjustable elastic at the waist for the perfect fit and a front closure with a welding proof flap construction. Available sizes: 44-70 NL. Available colors: Navy and royal blue
Flame retardant balaclava with high protection against Electric Arc in double tricot with ELIM: 22.0 cal/cm², EBT: 27.0 cal/cm², APC 2. 20% recycled cotton. Extra protection over the shoulders. Available size: Universal. Available color: Navy. Complies with: EN ISO 11612 A1B1C2F1 and EN 1149-5.
This multinorm work jacket has a regular fit. The twill weave makes this jacket very strong. The multinorm jacket has an ergonomic fit and pleasant wearing comfort. Quality: 25% polyester and 1% carbon. Available colors: Navy. Available sizes: XS-5XL. Conforms to: EN 1149-5: 2018, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, IEC 61482-2: 2009.
Flame Retardant Coverall bizflame FR51: Protects against radiant, convection and contact heat; Class 2 welding protection; Back pleat for more freedom of movement; Adjustable hem for all leg lengths; adjustable cuffs; UPF 40+ fabric blocks 98% of UV radiation radio loops; 10 storage bags; knee pockets; Concealed zipper. Quality: Bizflame Plus: 99% cotton, 1% carbon fiber 350g/m². Available colors: Navy and Orange. Available sizes: XS-2XL. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 2 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-1 Elim 8.6 cal/cm² and IEC 61482- 2 IEC 61482-1-2 APC 1 (12 ATPV 13.6 cal cm²).
Canvas protective bag made of 100% cotton for the storage of insulating gloves for electricians. Size: 14 inches.
Exterior: Concealed button closure / Zip fly, 2 set-in pockets with flap, 2 back pockets with flap and hidden snap button closure, 1 patch thigh pocket with flap and hidden snap button closure, 1 ruler pocket with flap and hidden snap button closure, elasticated waist, knee pockets, waistband with belt loops, flame-retardant reflective tape (50 mm). Inside; identification tag. Material: Sio-Safe Essential Eco 50% cotton + 30% Tencel + 19% recycled polyester + 1% AST; +- 320 g/m. Complies with: EN 61482-2 9.7 cal/cm² ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 116111 class 1 A1 A2, EN 1149-5, EN 13034 (typ PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 48-58 S, 44-64 R, 46-56 L
Long sleeved flame retardant and antistatic t-shirt in 60% merino wool/38% Lenzing FR®/2% Beltron®. Very comfortable and heat regulating properties, elongated back, long sleeves. Available sizes: XXS-XXL. Couleurs disponibles: anthracite.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Gray / black. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
Multirisk bib and brace with concealed zip, 2 inset side pockets, chest pocket with flap, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, adjustable shoulder straps with elastic, reflective band. The front meets arc class 2. Quality: 80% / 19% / 1% Cat / Poly / AS. Available sizes: 44-66 Havep. Available colors: Black / gray, gray / blue, blue / navy and red / blue. Conform: EN 1149-5, EN ISO 11611 A1A2 cl 1, EN ISO 11612 A1A2B1C1E2F1, EN 13034 and IEC 61482-2.
Multirisk jack with concealed press stud fastening, 2 inset side pockets with concealed zipper, inner pocket, 1 breast pocket with flap, sleeves with adjustable press studs, reflective tape on shoulders, extended back, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available colors: blue / gray, black / gray and gray / yellow. Available sizes: XS-2XL. Conforms to: EN 1149, EN 13034, IEC 61482, EN ISO 11611 and EN ISO 11612.
Designed to give maximum protection and comfort to the wearer, the Bizweld™ sleeves will provide protection in hazardous conditions. The elasticated cuffs ensure a flexible but comfortable fit. Must be worn with a suitable coverall or jacket/trouser combination. Quality: 100% Cotton, FR Finish. Available sizes: Universal. Available colours: Navy.
Hi-vis coverall Mornant with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo orange/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
Flame retardant polo shirt Telfs with arc flash protection. The polo has flame retardant reflection bands and fluorescent yellow accents. Quality: 54.5% Modacrylic + 44.5% Cotton + 1% AST; ± 220 g / m². Available sizes: S-3XL. Available color: Navy / fluo yellow. Conforms to: IEC 61482-2: 2018 APC1 - EBT 7.4 cal / cm², EN ISO 11612: 2015 / A1 B1 C1 F1, EN ISO 14116: 2015 and EN 1149-5: 2018.
Multinorm winter parka with taped seams and quilted lining. Completely metal-free. Wind and waterproof. Quality: Cantex 240IR, twill PU-coated membrane, 260 g / m². Available colors: Fluo yellow / navy. Available sizes: XS-4XL. Conforms to: EN 1149, EN 13034, EN 343 4: 1, EN ISO 11611 class 1, EN ISO 20471 class 2, EN ISO 11612, IEC 61482 class 2.
