BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Seamless knitted cotton, NO PPE
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 10,000 volts, operating voltage of 7,500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Cut and heat resistant arm protector 35 cm. Conform: EN388:2016 2.X.4.X.E
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Finger-sensitive glove with double waterproof nitrile foam coating on a cut-resistant PE carrier. Highly cut resistant. Glove 3/4 coated. Suitable for all operations requiring high finger sensitivity such as assembly, packaging, automotive, steel and glass industry, ... Sizes: 7-11.
- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X
Prioritize comfort and wearer safety with the CS710 chemical resistant gloves. A double-dipped nitrile coating offers robust durability, whilst the seamless liner and natural latex-free composition ensure comfort during long periods of wear. Enhanced grip from the foamed nitrile palm coating provides extra grip, even in oily or slippery environments. Sizes: 7(S) - 11(XL).
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.
Cut resistant glove made of HPPE and a black, abrasion resistant nitrile foam coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A light weight glove, high dexterity, touchscreen compatibility and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.3.4.2.C, EN407:2020:X.1.X.X.X.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Lined winter glove in goat leather. Open cuff. Thin. Fully lined. Sizes 7-11.
Cut-resistant glove with Zirnium with PU coating and reinforcement in split leather between thumb and index finger. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 6-12.
Warm, insulating gloves with acrylic/nylon liner with PVC coating. PVC-foam coating stays flexible in cold temperatures, food approved. Industy leading combination of comfort, warmth and dexterity.
Cut and heat resistant arm protector 45 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and para-aramid knitted cuff. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Blue nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Dark cut resistant glove made with the latest Dyneema® Diamond technology and a black, abrasion resistant PU coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A "breathable" glove, tactile, touchscreen compatible, electrostatic properties and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.X.4.3.C, EN407:2020:X.1.X.X.X, EN16350
Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.
Extreme comfort and protection in high cut risk applications for increased compliance and an uninterrupted workday. The Intercept™ Cut resistant Technology provides high levels of protection against lacerations. Lightest weight design for comfort and dexterity, su pporting worker use compliance. High abrasion resistance delivers longer product use life. Suitable for use across a wide range of applications and risks, avoiding the need to change gloves when transitioning between tasks. Intermittent handling of hot work items up to 100°C. Latex and Silicone free. Sizes: 6-11.
Winter lined glove in synthetic Serino leather with fleece lining and highly durable PU in the palm. Complemented with a windproof membrane on the back. The Serino also protects against damp and thereby keeps the hands dry. Chomim-free and washable at 40°C. Suitable for outdoor use in maintenance, and construction industries.Sizes 8-11.
Cut and heat resistant arm protector 45 cm., with thumb opening. Ergonomic design. Protects for 21 seconds againt 100°C contact heat (test report).
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
This glove is mainly used for handling smooth goods as well as goods with a sanded surface. Natural latex. Freedom of movement thanks to excellent comfort through extra support. Seamless. With reinforced cotton and grip. High cut-resistance and protection of the forearm. Applications: open sea fishing, forestry, oyster farming, barbed wire handling, glass industry, metal treatment. Sizes: 6-10.
Liquid-tight glove in jersey with high-quality neoprene coating, 45.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. Hence the great demand for this glove from the chemical and petroleum industry, the transport sector and companies that work with hazardous substances.
Glove with nitrile coating (cotton/polyester). Length: 30cm. Glove with high finger sensitivity.
Waterproof PVC bag with small karabiner to attach to belt. Ideal for storing and transporting electro gloves. Dimensions: 450x180x70 (mm)
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
Seamless glove with impermeable full nitrile coating all over the hand with extra nitrile foam coating finish on the palm for good grip on wet or oiled components. High-abrasion resistance and anti-impact protection on the back of the hand. Unique Showa ergonomic shape that replicates the natural curve of the human hand. High-visibilty green colour for visible hand signaling. Seamless knitt designed to prevent irritation.No Latex. Sizes: 7(M)-10(XXL)
Seemless knitted glove 18 gauge with nylon, spandex, carbon fibres and a FORTIX™ foam nitrile coating on the palm. This glove has ES D-functionalitye certified to EN16350, protection products against electrostatic discharge. It is also touchscreen compatible and dermatologically approved by Dermatest and certified by OEKO-TEX®. The nitrile foam coating offers excellent grip and long lastingprotection. The careful selection of materials, the Ansel ZONZ™ Comfort Fit Technology and proprietary washing process makes the HyFlex® 11-819 a clean, ultra breathable and highly comfortable glove. The glove is latex and silicone free, and laudryable at 40°C. Sizes: 6-11.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Chemical and cut protection glove, 0,3 mm, Nitrile, sandy finish. Fully-lined, 18 gauge polyester, nylon, glass fibre thread, spandex. Oil and grease resistant, for allround work.
Disposable 100% nitrile gloves with beaded cuff. Embossed fingertips for extra grip. Fully powder-free and free of natural rubber, waxes, silicones, or plasticizers. Touch N Tuff offers 3 x more puncture resistant than vinyl and natural latex. Suitable for laboratory work, chemical industry, emergency services, electronics and other precision assembly work. Colors: blue. Sizes: 6.5 to 7/7.5 to 8/8.5 to 9/9.5 to 10. Length: 300mm, thickness: 0,10mm.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 41 cm.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 3: operating voltage 26,500V, test voltage 30,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
Goat-hide leather glove for TIG welding. Heat resistant to 100 ° C. Length of cuff: 16 cm. Sizes: 6-11.
Seamless lined glove with foam latex coating on the full glove and extra latex on the palm. Extremely good grip and abrasion resistance. Carrier in nylon/polyester. Sizes: 6(S) -10 (XXL).
Welding and heat-resistant glove, Fully lined, 0,8-0,9 mm, Full grain goatskin, Full grain goatskin, Cut resistance level 4, KEVLAR® fiber, Nomex®, Cat. III, Brown, black, Extra long, Reinforced seams, Water and oil repellent, Elasticated 180°, for allround work. EN 388:2003, 3422 EN 407:2004, 41234X
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin, Full grain goatskin, Reinforced index finger and reinforced seams.
Glove with black HPPE and Zirnium and black PU coating and reinforcement in black split leather on palm, and fingers. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Highest cut resistance. Sizes: 7-11, lenght: 25cm.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 406 mm.
Extremely flexible goatskin work glove, designed for tough, hot working environments. Upper reinforced with heat resistant meta-aramide fibres and reinforced knuckles. Inner hand lined with para-aramid, which also provides cut protection level B, and reinforced externally for enhanced protection. Heat resistant double stitched seams. Sizes: 7-12.
ESD working glove compatible with touch screens. Seamless nylon / carbon. Without coating. Very comfortable. Sizes: 5-11.
Antistatic chemical-resistant gloves for protection against oil, paint, solvents and detergents in environments with a risk of electrostatic discharges.
Cut resistant gloves with Kevlar® liner in combination with roughened latex coating offer good grip and optimal protection against cutting injuries in both dry and damp environments. Sizes: S / M / L / XL. Available in: blue.
•Framing finger config for grasping fasteners •Padded palm with Tena-Grip™ reinforcement •Technical hex-stretch poly knit construction •Neoprene knuckle pad •Low-profile molded hook and loop closure with ID space •Pull-on tab for easy on/off •EN 388: 2016: 3.1.3.2.X •Patent pending
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL: 90 pieces per dispenser.
Knitted glove with HPPE and Zirnium with black PU coating. Extremely good cut resistance. Touch screen function on top of thumb and index. Sizes: 6-12.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.
Cut resistant and comfortable welding glove in reverse goat leather, with Kevlar lining and seams.
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 4: operating voltage 36,000V, test voltage 40,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
