BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
All-round white glove for catering operations. Mechanically strong, heat resistant and impervious for ovens, dishwashers, autoclaves, cooking activities. Nitrile glove of 45 cm with a cut resistant insert and brushed finish on the fingers. Sizes: 7 (outer size:9), 9 (outerr size: 11) and 10 (outer size 12).
Blue knitted food approved glove from the Revillet range (per piece) in polyethylene, polyamide, stainless steel fiber with long knitted cuff, does not contian glasfibre. This glove has excellent cut resistance, tested according to TDM standard (ISO 13997 TDM: 62,80 Newton). Treated to be permanent hydrophobic. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5,12 and 13 on demand.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff and palm reinforcement. Attractive, highly visible look with yellow and blue stripes. Available in: yellow/blue.
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
Gloves with five fingers, American cut. Palm, fingers and inside of thumb are made of para-amide coated interlock.. The gloves are fully lined with an acrylic/cotton felt. Elastic cuffs, finished with bias binding. The seams are stitched with a para-amide thread, overall length is 50 cm.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 2,3mm, Lenght: 360mm Certified category R/C. ATPV/ 14 cal/cm²
Seamless lightweight, 100% waterproof and windproof glove that is very finger-sensitive and gives you maximum dexterity. Laminated membrane technology for great protection against rain and moderate cold. This glove is characterised by its 3-layer construction with lamination technology, perfect and tight fit, very durable knitted nylon outer layer, fitted with waterproof PU membrane, ultra-thin and breathable ,Merino wool lining with moisture wicking anti-bacterial action and silicone MoG print on the fingers and palm for good grip. Sizes: S (7/8) - M (8/9) - L (9/10) - XL (10/11).
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 305 mm.
Blue knitted food approved hydrofobe glove from the Revillet range (per piece) in polypropylen, polyester, stainless steel and glass fiber with knitted cuff. This glove has excellent cut resistance, tested according to TDM standard. Prewashed, to make sure it will keep its form after nex washing cycles. Washable and waterrepelant. Sizes: 6-11. Size 5,12 and 13 on demand.
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Biodegradable single use glove, powder free.
Black powder-free disposable glove made of soft nitrile with extended cuff for extra protection of the wrist and forearm. Fully embossed for a reliable and consistent grip. Silicone and latex free and antistatic. The black color makes it easy to see if the hands have come into contact with potentially dangerous powders. The glove has been tested for phentalyl and stomach acid (vomit), simulating a dangerous overdose from practice. Suitable for use in the food industry. Length: 300mm, palm thickness: 0.14mm, finger thickness: 0.17mm. Sizes: (S) 6.5/7 - (XXL) 10.5/11. Complies with: EN ISO 374-1:2016 Type B: JKPT, EN ISO 374-5:2016 Virus, EN421
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.
Guide 6402 CPN offers a unique combination of maximum protection against needlesticks and cuts while maintaining flexibility and comfort. This model is the latest innnovation with needle and cut protection in the palm area. Kevlar in dark gray for heat resistance and cut protection is used on the back of the hand. Suitable for police and security forces when there are risks of cut, puncture and needle injuries. Great grip and tactile feeling. Sizes: 7-12.
Waterproof, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 40 cm.
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Nitrile glove with a sand grain finish on palm for a better grip. Version without lining, so the glove is ideal for production envir onments that are sensitive to external impurities. This glove is 33 cm long and 0.38 mm thick. Food approved.
Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.
Glove with PE and Zirnium. Extremely good cut resistance.
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Blue powder-free nitrile glove with rolled edge for applications in food industry. Completely latex free. Sizes: 6.5-7 to 9.5-10. Length: 24 cm. Thickness: 0,08mm. Package: per 100 gloves! Food approved.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Cut and heat resistant arm protector 35 cm. Conform: EN388:2016 2.X.4.X.E
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and para-aramid knitted cuff. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Knitted glove with HPPE and Zirnium with black PU coating. Extremely good cut resistance. Touch screen function on top of thumb and index. Sizes: 6-12.
Welding and heat-resistant glove, Fully lined, 0,8-0,9 mm, Full grain goatskin, Full grain goatskin, Cut resistance level 4, KEVLAR® fiber, Nomex®, Cat. III, Brown, black, Extra long, Reinforced seams, Water and oil repellent, Elasticated 180°, for allround work. EN 388:2003, 3422 EN 407:2004, 41234X
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 406 mm.
Extremely flexible goatskin work glove, designed for tough, hot working environments. Upper reinforced with heat resistant meta-aramide fibres and reinforced knuckles. Inner hand lined with para-aramid, which also provides cut protection level B, and reinforced externally for enhanced protection. Heat resistant double stitched seams. Sizes: 7-12.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Cut resistant and comfortable welding glove in reverse goat leather, with Kevlar lining and seams.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
Arm protector heat and cut resistant. Length 45 cm.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL: 90 pieces per dispenser.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 30,5 cm.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
The SHOWA 8005PF is designed for jobs requiring increased protection without compromising on comfort and tactility. A rolled cuff prevents dirt from entering the glove and allows for easy removal of the glove in case of puncture. The glove is ambidextrous and uses second-skin feel to significantly reduce hand fatigue over long periods of wear. Powder and latex free, food approved. Sizes: S(7)-XL(10).
Canvas protective bag made of 100% cotton for the storage of insulating gloves for electricians. Size: 14 inches.
Glove in butyl rubber, unlined, length 35 cm, thickness 0.78mm. Colour: black. Flexible and comfortable, protects against a wide range of chemical products, detergents and solvents, liquid-tight. Silicone-free and antistatic. Sizes: 7-10. Suitable for chemical, petroleum and paint industry, transport and handling of hazardous products.
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
Electrically insulating glove with mechanically strong resistance. Protects against risks of Arc Flash. Outside in black, inside in red, outside has a non-slip coating. working voltage of 1000 volts, test voltage of 5000 volts. Length 360 mm, Sizes: 7-12. In accordance with EN60903 class 0 cat RC. ASTM F2675: 25 cal/cm²
Gloves with chemically resistant coating consisting of 7 layers. Can also be used as liner gloves. Extremely supple and ergonomically formed model. Offers protection against an exceptionally wide range of chemical products and solvents. Silicone and latex free. Working temperature: -40°C to 70°C
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Very robust and strong rescue glove with extreme protection levels, designed for firefighters and rescue teams, suitable for heavier rescue operations at accidents, (natural) disasters, etc. such as clearing debris, breaking up wrecks, etc. but also in various industrial applications. Sizes: 6-13.
