BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Elastic anti-fall cords for tools - 4.5kg max. carrying capacity - mini 81cm to max 119cm when fully extended
Rebel fall-prevention device with 15 metre stainless steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.
Fixed anchor point for 1 person. Mounting possible in wall, floor and ceiling. Anchoring D-ring: 12 mm attachment. Can be loaded in 3 directions. During installation, this must be tested at 6kN, this can be done by our fixed fall protection team. Contact us for a tailor-made offer. According to EN795 A.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length: 0.6 metres. Anchor point for protection of one person.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Complete D breast anchor point. Leg straps easily adjustable. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps have quick-release buckles. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Large stand-up D-ring on the back of the harness.
Rope ladder made of orange, UV resistant polypropylene with 16 mm diameter rope. Equipped with two eyes at the end for hanging. Rungs are 40 cm wide, 3 rungs per metre.
Very robust fall-stop device: 10 metre galvanised steel cable, with integrated shock absorber and descent brake. Casing made of coated aluminium. Immediately stops any vertical fall. Serves as connection between anchor point and harness. Equipped with carabiner hook. After a fall, the brake ensures the person descends at a constant speed automatically. This mechanism can be activated in advance or remotely (provided a rescue rod is used). Only for vertical use. Weight: 8.5 kg. Maintainable.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7 kg.
Fall-stop device 2 metre kevlar band with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Kernmantle rope 10m diameter 10.5mm. For individual use or in combination with rope clamp.
Core jacket rope of 20 meters and 10.5mm diameter with a knot at one end and a musketon at the other, available in various lengths. Conforms to EN353-2
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 2m. Anchor point for protection of one person.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Harness is very easy to put on. Integrated fall indicator on the front and back, suspension trauma straps and padding on the waist belt.
Harness with two attachment points: on the back and on the chest. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Rebel fall-prevention device with 10 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use. Weight: 5.6 kg. Can be maintained.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 2,74m Not PPE.
Max. carrying capacity: 2.3 kg. For use with apparatus with closed handles or pre-drilled holes. Total length of 22 cm, the black loop (part to be attached to the apparatus) has a length of +/- 15 cm.
The 3M™ DBI-SALA® Utility Belt XL/3XL (waist size 40''-54'') is compatible with all 3M™ DBI-SALA® belt holsters and tool pouches. Padding inside two layers of Cordura provide for durability and comfort. No PPE.
Portable counterweight anchorage that can be placed easily on a flat rooftop to connect maximum 2 workers to an anchorage point. Contains 12 loads of 24 kg, a base and D-ring. In line with EN795E.
Very comfortable Fall arrest harness with 2 mounting points on back and chest. Breast Fixation Point by D-ring. Leg and shoulder straps with quick release, very easily adjustable. Harness very easy to put on. Size: XXL. Weight: 1,28kg. Suitable for general industrial applications.
Rope grab for use with 10.5 and 12,5 mm kernmantle rope. For vertical or near vertical fall protection on a temporary safety line. Follows the person's movements along the rope autonomously, without manual intervention. Can be blocked so that the person can only ascend, the device then becomes a field limiter in horizontal applications. Easy to remove and install on the rope. Includes connection to the chest anchoring point.
Very comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point and positioning belt. Straight leg straps easily adjustable. Shoulder straps adjustable. Tires made of dirt-resistant and wear-resistant webbing. Harness very easy to put on. Built-in fall indicator. Comfort padding on leg straps and hip belt. Maximum user weight including material: 140kg.
Mobile davit arm 6m to enable fall protection on vehicles, containers, etc. for loading and unloading materials and/or general inspection and repair purposes. Rotating arm, suitable for 1 person. Including 3 concrete slabs of +/- 1000Kg each and fall arrest block steel cable 10m. Price includes transport. Price for mounting upon request.
Equipped with 2 textile rescue loops on top of the shoulder straps. Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.
Lanyard, 1,5 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Max user weight: 140kg.
Lanyard without absorber 2M carabiners
Temporary horizontal lifeline in galvanised steel with a maximum length of 18 meters. Lifeline using line tension can be stretched between two points. Equipped with a snap hook to the hard plastic case and a carabiner on the end of the cable to be attached to various structures with anchor points. Housing provides a sturdy zinc handle with the carabiner attached to it. Weight: 11.25kg. Lifeline Thickness: 6.25mm. Strength: 24.5Kn. Serves 2 persons.
Fall-prevention device, 20 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. . Weight: 7.2kg.
Anchorage for I-beams ranging from 6.35 to 30.48 cm. Maximum thickness of beam 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Very comfortable fall protection harness with 2 attachment points on the back and chest, positioning belt and D ring at the navel for descent. Full D chest anchor point. Leg and shoulder straps are easily adjustable. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps fitted with quick release belts. Straps made of wear and abrasion resistant Repel webbing. Harness is very easy to put on. Integrated fall indicator.
Safety line 1.5 metre made of kernmantle rope with integrated shock-absorber Serves as connection between anchor point and harness.
Line without damper 2m with 1 large carabiner hook.
Fall-stop device with 2,8 metre strap with integrated shock absorber and 1self-locking hook and 1 scaffolder hook. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Steel carabiner automatic closing, opening 22 mm, weight: 230 gr. Breaking force: 40kN.
Lanyard, 2 metre length, 43mm width consisting of elastic strap with integratedshock absorber. Non-stretched length of the Lanyard is 1.2 metres, which enables better manipulation of the Lanyard. Fitted with 1 standard carabiner and 1 scaffholding carabiner. Serves as connection between anchor point and harness.
Bag for max. 100 m rope. Made of sturdy plastic. With 2 shoulder straps and 1 handle. Content 20L. Size: 35 x 55 x 23 cm.
D-ring combination concrete, sturdy design for heavy conditions. Safe 'hook up' indicator lets the user see if it is properly installed. Install in holes of 18 or 19 mm. Only standard drilling required.
all arrest block Rebel 30 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13,4kg.
To create attachment point on tools. For material lighter than 0.9kg. Always use with Python Safety Quick wrap tape. Not PPE.
To use with rescue harnesses, allows the victim to be pulled out of the manhole in vertical position.
Set of 25 quick rings with diameter of 3,8cm for tools with maximum weight of 0,9kg and that have pre-drilled holesin them. No PPE.
Adaptable to most walkie-talkies and phones. With D-ring. Can be attached to a belt or harness Not PPE.
Safety bucket designed for use at height, with a closure system which can prevent objects from falling. Piercing-resistant plates secured in the base of the bucket. With high quality, lightweight aluminium twist-lock carabiner. Vinyl for heavy use is easy to clean. Height 38.10 cm, diameter: 31.75 cm
Set of 25 2.5 cm diameter rings to attach to apparatus of maximum 0.9 kg when working at height. Not PPE.
Tool kit cord designed for use with medium to large hand tools of max 15.9kg. Length un-tensioned: 78.7 cm, length tensioned: 132.1 cm. Not PPE.
Double safety line of 2m with large hooks (50mm) for welders. Protection of damper against heat and combustion, up to 371°C. Straps reinforced with Nomex/Kevlar which provides protection against combustion.
Fall arrest block Rebel 15 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 7,5kg.
Sling sleeve anchorage system for temporary anchoring around a rigid support. Diameter:6 mm , lenght: 2m. In Line with EN795
Double safety line of 1,5m with large hooks (50mm) for welders. Protection of damper against heat and combustion, up to 371°C. Straps reinforced with Nomex/Kevlar which provides protection against combustion.
The Squids® 3010 Retractable Tool Lanyard is a lightweight and extremely durable tethering solution designed to mount to your belt or the webbing of a fall protection harness. Using a retractable lanyard limits potential snag hazards compared to standard lanyards. This lanyard can tether hand tools weighing up to 5lbs / 2.26kg to prevent falling objects when working at-heights. The retractable tethering cord is made of high-strength, cut-resistant Dyneema®
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
Equipped with 2 large self-closing aluminum hooks and 1 auto-lock aluminum hook. Easy to visually inspect due to the contrasting color stitching. Maximum user weight incl. tools: 140kg.
Tripod with tubular aluminium legs for lowest possible weight. Four eye bolts in the head that can be used as anchor points. Tripod is adjustable from 1.35 to 2.35 metres. Tripod is meant for two people, with a total weight of 500 kg. To be used in combination with winch and rescue set Rollgliss or SRL Weight 14.5 kg. Without carrying bag: 1003772.
Rope clamp for kernmantle ropes from 8 to 13 mm. Facilitates lowering of hoisting of a person using the Rollgliss system if the clamp is mounted on the rope of the Rollgliss. In compliance with: EN341.
Lanyard, 2 metre length, consisting of elastic strap with integrated shock absorber. Fitted with two standard carabiners. Max. user weight: 140kg.
Adapter for mounting sealed block on davit arm.
Fall-prevention device, 25 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7.4 kg.
