BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Coverall, 65 gr/m² , microporous film laminate, lightweight, hood, elastic waist wrists and ankles, 3 thread over loch stitch.
Flame retardant and anti-static fleece. Quality: 60% modacrylic, 38% cotton, 2% AST, 280 gr / m². Available sizes: S-4XL. Available colors: Royal blue. Complies with: EN ISO 14116 index 3, EN ISO 11612 A1.B1.C1., EN 1149-5.
Coverall, double polymer coated, extra layer of chemical resistant film, 100% particle tight, resistant to splashes of hazardous liquids (up to 5 bar), fixed hood with elastic, stitched and sealed seams, elastic at wrists and ankles and waist, zip with double flap and adhesive, thumb loops. Available in: orange, gray.
Shirt, 60% protex-M, 38% cotton, 2% antistatic, long sleeves.
Coverall, 50gr./m² polyester viscose rayon mix, firming nylon film on the inside, non-woven, flame retardant, limited use, to wear above heat- insulating clothing, 3-thread overlock seams, offers protection against hazardous dust and dirt. Available in: Blue.
Jacket, Guardian H²O polyester, 260 gr/m², zipper under flap, lined, hood also available. Concealed zipper and velcro closure at centre front, chest pockets with safety flaps and velcro closure, inside pocket at left hand side, goggle pocket behind storm flap, lower pockets with safety flap, lower side entry pockets with blind zipper closure, adjustable velcro closure at cuffs, adjustable puller at hem, fully taped seams, reflective striping.
Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.
Trousers, 60% protex-M, 38% cotton, 2% antistatique, manches longues.
Coverall, laminated, for limited chemical use, composed of various composite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version has stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees.
The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005
Hood, knitted Nomex®, flame retardant, with long collar, oval face opening. Available in: white. Sizes: 1 size.
Flame retardant boxer short. Quality: Merino RX, 200 g / m². Available colors: Black. Available sizes: XXS-4XL. Compliant with: EN ISO 14116: INDEX 3, EN 1149-5.
Trousers, Guardian H²O, flame retardant, antistatic, water and wind proof, elastic in waist, side pockets, reflective bands.
Firefighting jacket in NOMEX® STRIKE, 220g/m², SOFIGUARD treatment with PU FR membrane (145g/m²) and aramid lining (250g/m²). High separate collar, patched radio pocket, microphone loop, zip closure under flap with velcro closure, cuffs with thumbloops, 2 patched pockets with flap and hole loops, torch holder, coated KEVLAR® reinforcements on shoulders and elbows, elongated back, bottom hem finished to prevent water rising, extra internal thermal reinforcements on shoulders and arms. Available colours: navy. Available sizes: S-4XL.
Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside).
Firefighting trousers in NOMEX® STRIKE (220g/m²), SOFIGUARD treated with PU FR membrane (145g/m²), internal aramid (ARALINEX) lining (250g/m²). Press-stud closure under velcro, external reinforcements on knees, executed in 2 parts for easy bending, removable suspenders, 2 patched leg pockets with extra knee pads in neopreen. bottom finished for protection against water rising, leg hem provided with KEVLAR® re inforcements, leg cuffs. Available sizes: 164/82 untill 194/124. Available colours: navy.
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Splash suit made of blue laminate. Suit with attachedc hemically resistant Kemblok gloves. The pant legs have integral socksandstraight legsthat can bepulled over boots. The zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Available in: blue. Sizes: S - XXL.
Hood, 48.5% Meta-aramid, 48.5% viscose FR (lenzingFR), 3% belltron.fire retardant, long collar, oval face opening. Available color: blue. Sizes: 1 size.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Suitable for work in ATEX environments only in combination with Hazmax ESD boots. Sizes: S - XXL.
The AGC + overalls are IFT homologues for insect bites: - Thick "anti-bite" substance with special treatment, - Removable panoramic screen and metal for a full view without turning the head, - DIPTER marked gloves with pre-positioning for increased safety, - clamping clamped arms and legs with new safety belts, - Double thickness on the tension points (elbows, thighs, back) to prevent punctures, - Zip closure with flap protection against intruders, - Vented eyes with grate for better ventilation and safety, - Combinations supplied with helmet, removable screen and a pair of gloves. Available values: <(><<)>1.85 m (red)> 1.85 m (green). In accordance with: EPI standard NF EN 340.
SIP Protection BasePro chainsaw jacket. The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work: Short and straight collar; Zip closure; 2 inset pockets with zip closure; Sleeve narrowing by press studs; Back ventilation; Elongated back tail. Quality: 65% Polyester - 35% cotton outer fabric ± 210 g/m². Available sizes: S-4XL. Available colours: Fluo yellow/black and fluo orange/black.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Sizes: S - XXL.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed kemblok gloves. The suit is designed to be worn over the compressed air equipment. With pass-through and CEJN couplings to be able to connect to external air source. Available in: yellow. Sizes: S - XXL.
High barrier Type 3 <(>&<)> 4 chemical suit combined with FR properties. Can be worn over Thermal Protective (EN11612) Garments without compromising thermal protection as a standard chemical suit would. Quality: PVC film / EVOH film/ woodpulp/polyester nonwoven fabric. 232g/m². Available sizes: S-XXXL. Available colours: Dark blue.
Gas tight suit made of Tychem TK, the most resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has replaceable gloves. The suit is designed to be worn over the compressed air equipment. Delivered in a sturdy bag. Available in: yellow. Sizes: S - XXL. Weight: 6 kg.
The Respirex Hazbag is designed to contain a contaminated suit. It is manufactured from Chemprotex™ 300, a high performance chemical barrier material, and measures 1050 x 1370 mm. The Hazbag is supplied with a strong cable tie for sealing the neck of the bag. The facility to mark the bag is also provided by means of a tag and plastic wallet on the cable tie.
Gas tight splash suit made of chemprotex 300. Suit with attached chemically resistant butyl gloves. The pant legs have integral socks and straight legs that can be pulled over boots. The gas tight zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Sizes: S - XXL. Can be used in Atex zones 1 and 2. Conform: EN14605 Type 3. Accessory: anti-mist klar pilot for visor 1002608.
Flame retardant underpinning salon. With elastic at the waist. Quality: Merino BX, 250 g / m². Available colors: Black / gray. Available sizes: XXS-4XL. Complies: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, TRANEMO SKINSAFE ARC RATING: 10.9 cal / cm².
Flame retardant long underpants for women. Quality: Merino RX, 200 gsm. Available colours: Black/grey. Available sizes: S-2XL. Compliant: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, IEC 61482-2: APC 1, ELIM: 4.6 cal/cm² ATPV: 5.3 cal/cm².
Coverall, laminated, for limited chemical use, composed of variouscomposite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version hasstitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees, attached boots with boot overflaps, double cuffs, double zip closure and storm flap front fastening.
Gas tight suit Viton laminated, the most resistant material for reusable suits.Suit with replaceable boots. The breathing apparatus is worn inside thesuit. Equipped with a connection for automatic switch valve. With replaceable gloves. The Hazmat suit comes in a suitcase. Available in red. Sizes: specify.
Flame retardant boxer shorts with recycled cotton. Quality: Cantex JX, 235 g / m². Available colors: Navy. Available sizes: XXS-3XL, 5XL and 7XL. Conforms to: EN ISO 11612 A1 B1 C1 F1, IEC 61482-2 CL.1, Arc Rating: 7.0 cal / cm².
Flame retardant women's boxer shorts in a soft jersey with 20% recycled cotton. Elastic at the waist. Mid-rise waist, regular leg length. Lined crotch area. Quality: Cantex JL, 210 gsm. Available colors: Navy. Available sizes: S-2XL. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, IEC 61482-1-2 CL.1, ELIM: 4.3 cal/cm², EBT: 4.5 cal/cm².
Flame retardant soft sports bra. Spacious, adjustable shoulder straps for maximum support. Quality: Cantex JL, 240 gsm. Available colors: Navy. Available sizes: S-2XL. Complies with: EN ISO 14116 index 3, EN 1149-5.